Four Side Planer

WEINIG PFA 17N

Condition: used, Weinig combiner machine, model PFA17N, grooved bench, 8 shafts (lower 4kW, right 4kW, left 5.5kW, right 4kW, upper 5kW, lower 4kW, universal 4kW, universal 4kW), used. Ksdpfey S Acxox Amrjlu

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Kledpsvrq U Dofx Amrju

Condition: used, Number of boring spindles 7 St. Working width 160 mm Working height 120 mm Kljdjzb Rffepfx Amrsu Length of the planing table 2.000 mm Feed motor 2,2 kW Weinig PFA 17 N (Unimat) automatic planing and chamfering machine for four-sided planing and profiling of wood, equipped with a universal spindle. Spindle 1: Bottom / 35 mm / 4 kW Spindle 2: Right / 35 mm / 3 kW Spindle 3: Left / 35 mm / 5.5 kW Spindle 4: Right / 35 mm / 7.5 kW Spindle 5: Top / 35 mm / 5.5 kW Spindle 6: Bottom / 35 mm / 4 kW Spindle 7: Universal / 35 mm / 4 kW

Condition: used, Technical data: Max planing width: 170 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle sequence: bottom 4 kW right 3 kW left 5.5 kW right 5.5 kW Kljdjyhndrjpfx Amrju top 5.5 kW bottom 4 kW Each spindle driven by a separate motor Number of upper steel feed rollers: 7 Number of upper rubber feed rollers: 2 Stepless feed speed adjustment – 4 kW Feed by chains Lubrication pump for worktable Pressure: 6 atm. Electric raising of the machine body Power supply: 400 V Total power: 33 kW Overall dimensions: Length: 5000 mm Width: 1300 mm Height: 1560 mm

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Kljdpfx Amswvqklorou Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: used, Year of construction: 1971, operating hours: 4,348 h, functionality: unexamined, machine/vehicle number: 462-1717, Used moulder Weinig PFA 17N, manufacturer: Michael Weinig KG, Tauberbischofsheim (Germany), model: PFA 17N, year of manufacture: 1971, machine number: 462-1717, 7 spindles (incl. universal spindle), spindle diameter: 40 mm, motor power approx. 3–5.5 kW per spindle, max. planing width approx. 170 mm, max. planing height approx. 120–140 mm, feed rate adjustable, weight approx. 3,500–4,000 kg. The machine is used and in age-appropriate condition. Kodpfxoxlacms Amrelu

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used pellet mill OGM 1,5 with 75 kw main engine. Capacity from wood about 1 tone/hour. Include a lot of spare part: Kedpfx Amjx R Suzsrolu - new ring die 6mm for wood: Salmatec Brand ( price from manufactory 2700 eur for 1). - New bearing for roller 10 pcs. - New roller shell 10 pcs. - other spare parts, main axhis, plates for rolles.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Klsdpfxohzgtue Amreu Width: 1000mm Height: 1900mm Weight: about 100kg

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Kjdpfx Amoyngy Ssrelu Main saw blade projection: 50 mm No of Grippers: 8

Condition: excellent (used), Year of construction: 2001, Complete Parquet painting shop Manufacturer - SORBINI/ VIET Year - 2001 Capacity - 800 m2/shift Ksdjrdgrvjpfx Amrolu Time of one cycle - 8 min. Lenght of the line - 42 m