Used Deckel Gk 21 for sale (697)

Condition: good (used), Year of construction: 1980, Engraving machine and copy milling machine Manufacturer DECKEL Type: GK 21, year approx. 1980 Maximum cutter diameter: 10 mm Spindle speeds 475 - 20,000 rpm Travel paths: 160 mm Y300 mm Z 365 mm Table: 200 mm X 360 mm Cjdpsvk D A Eofx Ap Djhd Machine cabinet with lots of accessories and machine documentation available. Weight: 620 kg.

Condition: used, Year of construction: 2012, Manufacturer: DECKEL MAHO, Type: DMC 1035 V, Year of manufacture: 2012, Serial No. 15425051954, Operating hours: 46,416, Spindle hours: 18,325, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline touchscreen, Tool magazine for 40 tools, SK 40, Travel range X/Y/Z 1,035 x 560 x 510 mm, 3 machine vices, Manufacturer: Roemheld, Type: HILMA NC 125, Jaw width 125 mm each, Chip conveyor, Chip cart Chedpfx Aoz Tlhiep Djd +++ ATTENTION! This machine is part of an online auction! +++

Condition: good (used), x-travel 300 mm y-travel 160 mm z-travel 360 mm Chsdpfx Ajw U Shhop Ded Total power requirement 1 kW Machine weight approx. 0.8 t various engraving kits

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2838-0410, overall weight: 2,500 kg, We are offering this used DECKEL FP4 NC universal milling and drilling machine, manufactured in 2003. Chodpfxo Ah Dlhs Ap Dsd Manufacturer: DECKEL Model: FP4 NC Year of manufacture: 1981, general overhaul in 2003 Machine type: Universal milling and drilling machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Cedpfx Apepy Eldo Dohd Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: good (used), Year of construction: 2001, functionality: fully functional, Net price: €14,200.00 Gross price: €16,898.00 You will receive a proper invoice with VAT shown. Internal article number: 26100 Deckel Maho DMU 50 T 5-axis (3+2) CNC machining center Year of manufacture: 2001 Operating hours: approx. 31,000 hours Cjdpfo Ahhggox Ap Dehd Program run time: approx. 8,500 hours + Documentation (operating manual, electrical wiring diagram, floppy disks) + Electronic handwheel Technical data Control: Heidenhain TNC426 Tool holder: SK 40 Tool places: 16 Travel distances X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm Table size: 700 mm x 500 mm rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: 17 kVA Weight: approx. 3000 kg Dimensions L x W x H: approx. 200 x 160 x 220 cm The machine is fully functional, in good condition and can be inspected and demonstrated in our heated warehouse with over 500 m² of space, while powered on. If you have any further questions, please do not hesitate to contact me by telephone at any time.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! Chodpfe Afulmox Ap Dod FCA D-71679 Asperg - loaded onto a truck.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg Csdj Ahq Ekepfx Ap Dshd >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 51434/08 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system Chjdps Ahq A Eefx Ap Dod About the machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash, and all spindles move easily. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), Year of construction: 2006, operating hours: 4,895 h, functionality: fully functional, machine/vehicle number: 11415553974, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, DECKEL MAHO DMU 50 – 5-axis CNC machining center Technical data: Manufacturer: DECKEL MAHO / DMG Model: DMU 50 Year of manufacture: 2006 Serial number: 11415553974 Control system: HEIDENHAIN iTNC 530 Axes: 5 (X, Y, Z, B, C) Travel range X: 500 mm Travel range Y: 450 mm Travel range Z: 400 mm Spindle speed: up to 8,000 rpm (manufacturer's standard, to be confirmed) Tool holder: HSK 63 NC rotary table: B and C axes Table size: 630 × 500 mm (manufacturer's specification) Maximum table load: 200 kg (manufacturer's specification) Operating hours: approx. 25,632 h Second hour counter: approx. 4,895 h Connected power: 17 kVA Cjdpfo Afwhqox Ap Dohd Operating voltage: 400 V / 50 Hz Condition: Used, well-maintained appearance. Important: The machine is sold exclusively without any accessories. No tools, tool holders, or machine vises are included. Inspection possible by appointment.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Cedpfx Aps Ah H Txo Djhd Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chedpfx As Ahn Hysp Dsd Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: good (used), functionality: fully functional, Net price: €6,800 Internal article number: 26096 Universal tool grinding machine Cedpfxj Ahhl Ne Ap Dohd Deckel S11 Includes dividing head (without Deckel brand dividing head) Includes documentation (electrical circuit diagram, operating manual, parts list) The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which has over 500 m² of space.

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller model: CNC Heidenheim ITNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 18,000 h, number of slots in tool magazine: 94, Equipment: chip conveyor, documentation/manual, Technical specifications Travel ranges: X = 750 mm, Y = 600 mm, Z = 520 mm Speed range: 20–18,000 rpm Tool interface: HSK 63 Tool magazine with 92 tool positions Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar 3D probe Band filter General overhaul in 2021 The following work was carried out during the general overhaul: Replacement of hydraulic lines Chedps Ahxzqefx Ap Djd Replacement of linear guides and ball screws of the X, Y, and Z axes, including associated bearings and timing belts Replacement of scrapers and bellows Work carried out most recently in 2026 Repair of the Z-axis servo motor Replacement of the hydraulic unit for lubrication Replacement of the AC servo controller of the X-axis

Condition: good (used), functionality: fully functional, Internal article number: 26101 Universal tool grinding machine Deckel S11 Clamping surface of the tool slide: 500 x 180 mm Max. tool diameter between centers: 130 mm Max. tool diameter with free clamping in the universal dividing head: 620 mm Max. tool length between centers: 270 mm Grinding stroke: 190 mm Grinding stroke during helical grinding: 190 mm Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Coarse adjustment travel: Tool holder: 220 mm Grinding head holder: 800 mm Universal dividing head on tool slide: 330 mm Three-phase drive motor: 1.1 kW at 2800 rpm Codps Ahhiuofx Ap Dshd Spindle speeds, stepless: 2000 to 12000 rpm Max. cutoff wheel diameter: 200 mm The machine is fully functional and can be inspected under power by arrangement in our heated warehouse of over 500 m².

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes Chedpo Ahzl Djfx Ap Dod - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Table width: 600 mm Rotary table diameter: 600 mm Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm C-axis swivel range: 360° Cjdpfx Apj Afw Auo Dohd Tool interface: SK 40 Tool positions: 24 MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) NC-controlled swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table 24-position tool changer

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW Chedpo Agwvmefx Ap Djd >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: Cjdpfx Ape Agn Rxj Dehd >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D Powerline, workpiece height (max.): 1,580 mm, workpiece diameter (max.): 1,000 mm, total height: 3,394 mm, total length: 5,551 mm, total width: 3,375 mm, table width: 800 mm, table length: 1,000 mm, overall weight: 17,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho (DMG) DMC 100U Duoblock from 2008 with the Siemens 840D control. Technical specifications: Table dimensions: 1000 x 800mm Number of pallets: 2 Max. workpiece dimensions: ø1000x1580 mm Max. workpiece weight: 1000kg X-axis travel: 1000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Chedpfx Apj Agvh To Ded A-axis (rotation of the head): 130 ° (0,001 °) C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 Chodpfx Ape Agn Inj Djd >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: used, Year of construction: 2009, This DECKEL vertical CNC machining center, type: Maho DMC 635 V, will be auctioned off in our industrial auction / machine auction, which includes liquidation of industrial machinery – injection molding machines, CNC machining centers, universal lathes, and more – online. You can find this and many other items on our platform. Chedpj Agku Hefx Ap Dod

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,000 kg, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, Commissioned in 2013 Chedpj Agnwdofx Ap Dod with RS 3 circular tool magazine (3 pallets) Control system: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Heidenhain infrared probe Blum laser measuring system 3D Quickset Air cleaner electric handwheel

Condition: used, Year of construction: 2003, functionality: fully functional, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW Chjdpfjy A Tdnox Ap Djd weight of the machine ca. 10,6 t

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine Chsdpfx Aoz Indhop Djd • Tool positions: 30 • Max. tool length: 300 mm