Lathe-conventional-electronic

VDF BOEHRINGER VDF 180 Cm-H

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Gbjdjv Rwu Uepfx Aiveu Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1998, Mazak SQT30M CNC Lathe, year 1998, Japan Gbodpexutcfofx Aivju C-axis, driven tools Mazatrol T plus Turning length: 1000mm 12-inch chuck Spindle bore: 98mm VDI50 turret Tailstock Probe Chip conveyor

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor Gbedpfxouhauyj Aivsu - Parts catcher with conveyor in position 6

Condition: good (used), functionality: fully functional, turning length: 5,200 mm, turning diameter over cross slide: 940 mm, turning diameter: 900 mm, spindle bore: 204 mm, torque: 3,000 Nm, bar passage: 204 mm, total height: 3,600 mm, total length: 10,820 mm, total width: 3,381 mm, collet bore: 450 mm, spindle nose: ASA 15, overall weight: 39,000 kg, MULTITASKING Gedpfsryvxhjx Aivsbu Siemens 840 CNC retrofit in 2018 Diameter on the bench 940 mm Turning diameter over the entire length 900 mm Distance between centers 5200 mm Tilting milling head + - 90° Torque 3000 Nm Axial force 60 Kn Turning head Chain tool change 48-place HSK 100° Spindle taper ASA 15 Bar passaging 204 mm Tailstock CM6 Tailstock diameter 195 mm Tailstock stroke 285 mm Automatic rest Autoblock 50-450 Chip conveyor Dimensions: 10820 x 3381 x 3600 mm Weight 39.000 kg USED MACHINE

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale Gbsdpfx Aijdzp Tcjveu - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Technical details: Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Godpfxevfdr Ns Aivjbu Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: like new (used), Year of construction: 2025, functionality: fully functional, FORSTNER nuSLIT longitudinal slitting and cut-to-length line, year 2025. The machine is in excellent condition and fully operational. It was used only at several exhibitions and in a demo center. The machine is designed for longitudinal slitting and sheet cutting operations. It is fully programmable, with automatic adjustment of the longitudinal slitting knives. Gjdpey Dfnnefx Aivjbu Longitudinal slitting into 6 strips (5 pairs of knives) with the possibility to mount up to 7 pairs. Equipped with a modern F3 control system featuring a touchscreen interface, which allows easy programming of different lengths, widths, and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and enables precise, clean perpendicular cuts. Integrated material-saving function – the machine stops, the slitting knives are raised, and the sheet is automatically fed into the shears. Comes with complete technical documentation. Specification: Model: FORSTNER nuSLIT 1250 Made in: Austria Year: 2025 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Cutting: rotary shears Controller: F3 Other features: automatically adjustable longitudinal slitting knives If you have any further questions, we will be happy to assist you.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Gbedpfxsxqp I Ne Aivou

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Inspection possible by appointment. Gbjdsxcwdvepfx Aivsu

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Gbjdpfxjrpk Rmj Aivsu Cutting tools not come.