CNC Lathe - Inclined Bed Type

Niles Simmons N30 - 3MC-2500

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA Nlsdpfxjz R D Hle Akieh weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Nedpfxsza E S De Akislh

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Nljdou Nc Riopfx Akioh Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm. Nledpjki Tlqofx Akieh

Year of construction: 2002, condition: not inspected (used), Robot Nodpfx Akjgu U Itoielh no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Nedpsyxcu Uofx Akielh Machine type: horizontal band saw Cut: miter cut Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Weight: 2500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Maximum bending length: 6100 mm Bending force: 400 tons Motor power: 30 kW Voltage: 380 V Oil capacity: 400 liters Dimensions (L x W x H): 7750 x 2850 x 3400 mm Nodpfsyr N Rbjx Akielh Weight: 31750 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Nlsdjtk It Sepfx Akioh Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Njdorzq Arepfx Akielh Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm Nsdpfxoy R N Ile Akiolh * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor