Chipper, shredder ideal for pallets

Untha

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm Dcjdpfob Nrbnox Abber with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Dcedpfx Aboqt Dmysbjr According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), ♻ The MONSTER is a hybrid machine with two shaft PRE-SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets. ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder combined with pre-shredder, capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder with pre-shredder: ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets ✔ Filling opening: 2072 x 1070 mm ✔ Weight: 4200 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels Dcsdpfxjtpwrmo Abbor 1 years warranty or 1000 working hours

Condition: excellent (used), CATALOG NUMBER 6955 TECHNICAL DATA - Feed hopper inlet (L x W): 1070x710 mm - Outlet for chipped wood: Ø 200 mm - Rotor working width: 700 mm - Main motor: 18.5 kW Dcjdjlnkb Njpfx Abbsr - Pump motor: 1.5 kW - Number of knives: 21 pcs - Knife size: 35x35 mm - Screen: 50 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1700x1300x1640 mm - Weight: 1780 kg ADVANTAGES – German-made – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 67,900 PLN Net price: 16,160 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder ideal for pallet shredding, with incline conveyor and magnetic roller for nail separation. Also suitable for plastics due to the powerful 45 kW motor. Equipped with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 knives on the rotor. New price was €80,000! Dcodpfjw Td S Nex Abbjr

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m Dodpfoiq Uz Rsx Abbjcr ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 2010, Heavy-duty shredder with large rotor Low operating hours Used, excellent condition, low usage Manufacturer: DHB-Maschinenbau Type 800 Year of manufacture: 2010 Operating hours: 2108 Machine number: 30123 CE type-approved Dcodoxddukopfx Abbjr Motor: 30 + 2.2 kW Slow-speed With hydraulic push floor Hopper opening: 800 mm x 1000/1300 mm / 1.25 m³ Cutting width: 800 mm Rotor size: 800 x 400 mm diameter Vibration dampers Number of blades: 46 concave pieces Screen hole size: 15/20 mm New price approx. €45,000 Extraction connection D 200 mm Required space approx. 2700 mm x 1600 mm x 1900 mm Weight approx. 3400 kg Total connected load approx. 32.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in current condition No warranty or guarantee

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor, with reduced knife protrusion, suitable for both hard and soft materials + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Sample image above: color of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta starter - Fast hydraulic system - Automatic shutdown in rotor idle mode - Speed: 70–90 rpm for high throughput - Cycle control to minimize idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *Visible in the last 2 images. - Additional blade row + €2,790 - Segmented bottom + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 Djdpfxex Af Rdo Abbocr (Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation) - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Synchronous start-stop with shredder) - Enlarged feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.