Wood shredder

Untha LR1000

Condition: good (used), Year of construction: 1998, Shredder with 1 m rotor width, ideal for pallets. Rotor diameter 300 mm with 24 knives. 22 kW motor. Equipped with discharge auger. Extraction connection 250 mm. Screen perforation 25 mm. Pgedpfx Asxzpzdsg Djw

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table Pgjdpfx Ajgr Er Sog Djw 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: new, Year of construction: 2024, Brand New - available immediately Dimensions LR1000 WxHxD 1805 / 2005x1630x1706 mm Rotor diameter 300 mm Shredder chamber opening 1000 x 1050 mm Hopper capacity approx. 1000 L. Drive Drive power 1x30 kW Construction Flexible belt drive, Elastomer shock absorbers Power of the hydraulic aggregate 2.2 kW Rotor speed 96 U / min Gear Bauweise 2-speed oil-bath transmission. Pgsdpfx Agsidiyvs Djw Cutting tools Number of knives 54 Pieces Control Cable length. engine - control cabinet 4 m Cabinet dimensions WxHxD 600 / 760x760x210 Requirements for the electrical installation Air temperature + 0ºC to + 40ºC Power Voltage and voltage stability 0.9 - 1.1 of the rated voltage Frequency 0.99 - 1.01 Rated frequency 0.98 1.02 short-term. cos φ = 0.90 - 1.00. Limits for voltage fluctuations - unbalanced, voltage drop and overvoltage In accordance with EN60204-1; 1997 Fuses [A] 1x30 kW: 100 Service space The service space necessary for good machine operation is 700 mm on each side! Lifting equipment Extraction connection Ø 250 mm The minimum speed of sucked air. 28 m / s Additional data weight About 3000 kg Noise level (DIN 45635-31): Workplace sound pressure level (LpA, 1m) Acoustics Level (LWA) ca. 82 dB (A) ca. 90 dB (A)

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The following machines, all in very good condition, are available for sale – perfectly suited for professional use in the wood processing industry. Saw line consisting of: • Feed unit ZV21, model EV 50 • Profiling chipper ZD31, model VM50 • Outfeed unit AV31, model VZM • Centering device VZ21, model VZV • Log rotation device DV21, model DV70-2 • Infeed and centering unit EVP • Profi Chipper VM50 • Profiling unit VMP450 F61 (4x110kW) • Microtec measuring system Psdpfxjw Stiue Ag Djgw Additionally available Other used woodworking machines ?️ Also available: Additional used woodworking machinery Log infeed Springer  • 5-arm design  • Log distributor (5-arm)  • Receiving tipple transfer (26 m) Log rotation device LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 units chipper infeed – infeed and centering unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separator conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 units LINCK chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – left & right side  • Dimensions: 2.8 m x 2.1 m x 2.5 m (each)  • Weight: 3 t each LINCK pre-centering unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log infeed with loader and log conveyor Location & Availability All machines are located at our warehouse, A-3525 Lugendorf No. 38, and are available immediately. Price upon request For further information or to arrange a viewing appointment, please do not hesitate to contact me.

Condition: new, Year of construction: 2024, New machine Pjdot Hagnspfx Ag Dogw Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: excellent (used), Year of construction: 2019, operating hours: 278 h, Max. Workpiece Size for Peripheral Milling: X = 3,620 mm Maximum Travel Distances: X = 3,865 mm Minimum Room Height: 3.20 m Machining in Y and Z Y = 1,600 mm; Maximum Panel Width 2,000 mm Maximum Workpiece Height 300 mm Measured from the top edge of the vacuum suction cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured via USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE – HIGH-SPEED MILLING Control Siemens industrial PC control Handheld remote control unit for machine operation MILLING HEAD 5-axis head 7840, Power: 12 kW n(max) = 0 - 24,000 rpm, steplessly adjustable Cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holding fixture Max. Tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing the standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, including saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X, 6 in Y direction, 32 mm pitch n(max) 1,000 - 5,710 rpm steplessly adjustable 6 horizontal spindles 2 double drilling spindles in X 1 double drilling spindle in Y Including saw unit Integrated saw unit for sawing / grooving in X direction n(max) 1,000 - 7,330 rpm steplessly adjustable MACHINE TABLE Machine table with 6 consoles, pneumatically clamped, adjustable in X direction Display and positioning of consoles and suction cups via software program 2 lateral stops at field A and D, 2 large buttons for clamping and releasing workpieces, 2 tape-measure position displays for console positioning in X relative to stop at field A/D, tape-measure positioning for suction cups at each console in Y relative to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction Pgsdexfaf Uspfx Ag Dew LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy workpieces TOOL CHANGERS Tool changer 7996, 18-position magazine (carousel), automatically moves in X-axis direction Moving tool changer 7886, 1-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatically operated Max. Tool diameter: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED lighting for the machining area. SAFETY OPTIONS Safety enclosure according to CE standards Protective fencing on the side and rear EQUIPMENT VARIANTS AND ACCESSORIES – LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Each module can simultaneously control up to 5 frame clamping elements. Simultaneous opening/closing of connected frame clamping elements, including foot pedal for operation, max. 2 modules per field A and field D available; OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum suction cups

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Pgsdpfx Aevytfueg Djw

Year of construction: 1992, condition: excellent (used), E.Gillet vertical sawmill cutting line. Wood feeder and receiver included. Maximum cutting length 6.5mb Very good condition. Pgodpfxei Egn Uj Ag Dow

Condition: used, Ražotājs: Munch Modelis: 420 Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta clear 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Pgjdpfx Agjwfqn Ao Dew Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul

Year of construction: 2024, condition: new, The mini pallet shredder is ideal for shredding small and/or dismantled pallets. Pjdpfepahwvox Ag Dsgw