Flow wrapper

Ulma Atlanta

Year of construction: 2005, condition: used, Ulma Atlanta flowpacker Hjdpfx Akjt Uw Eqoiow -

Condition: like new (used), functionality: fully functional, ESPERA ES 5000 ID.NO. 2779 Espera ES 5000 price labeler / Check scale this machine applies the label from the top of the package. Dimensions 155 x 90 cm Height 150 cm. Band width 30 cm. Wave length 37 cm. Hedpfxoua D Ine Akisw

Condition: like new (used), functionality: fully functional, cutting length (max.): 600 mm, cutting width (max.): 410 mm, The machine is in very good condition – like new. Equipped with a vertical heating element and sealing jaws for packaging in PE (polyethylene) film – a complete set of jaws for laminates is available. Forming tube for packages with a width of 350 mm – other sizes are available. Technical data for ILAPAK Vegatronic 4000 VFFS: ▪️ Output: up to 140 packages/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ Heat-sealable films Hjdpfx Aey Tqybjkijw ▪️ Polypropylene (PP) ▪️ Laminates ▪️ PE (polyethylene) film Film roll: ▪️ Maximum roll width: 880 mm ▪️ Maximum outer diameter: 550 mm ▪️ Core diameter: 76 mm ▪️ Maximum roll weight: 100 kg Power supply: ▪️ 400 V ±5% ▪️ 3 phases + neutral ▪️ 50 Hz ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ Memory for up to 100 programs Construction: ▪️ Stainless steel ▪️ Hygienic Open Frame design ▪️ Quick bag size changeover ▪️ Film centering ▪️ Servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ Approx. 1500 kg

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Hsdpsy Iplfofx Akiew 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,200 kg, This advertisement serves solely for informational purposes and does not constitute a legally binding offer. The H180 model is the ideal equipment for agriculture, the construction industry, the electrical, plumbing, repair, and similar sectors. We also guarantee equipment service even after the warranty period has expired. Wheel loaders are manufactured based on and under the supervision of European technicians. The equipment consists of a robust structure and can operate under all conditions. DIMENSIONS AND WEIGHT: Length (without attachments): 3.5 m Length (with standard bucket): 4.25 m Overall width: 1.1 m Overall height: max. 2.4 m / min. 1.7 m Empty weight (without bucket): 2200 kg Wheelbase: 1.86 m Axle distance: 1.55 m Tires: 10.0/75 – 15.3 OPERATING PARAMETERS: Lifting height (lower edge of the standard bucket): 2.8 m Maximum lifting height (top edge of the attachment): 3.2 m Maximum lifting height (top edge of the bucket): 3.5 m Dumping height (45°): 2.4 m Maximum lifting capacity (at the attachment): 800 kg WORKING EQUIPMENT AND HYDRAULIC SYSTEM: Bucket width: 1.05 m Bucket volume: 200 liters Bucket weight: 130 kg DRIVE AND TECHNICAL EQUIPMENT: Engine: KUBOTA – DIESEL Engine model: D1105 Engine power: 18.2 kW – 25 hp Hedpfxeyk Edzs Akisw Battery voltage: 12 V Gears: 1 Drive: hydrostatic Brakes: disc brake Parking brake: drum brake ADDITIONAL EQUIPMENT: Bucket and forks Road lighting Trailer hitch Additional hydraulic circuit Joystick control 4x4 drive Quick coupler PWG pump Italy PRICE: €14,500 net €17,255 gross

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Hjdpsug Edkefx Akijw Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality Hedpfxsgq N Ezs Akiow

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm Hedsvwgmgopfx Akisw The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Year of construction: 2013, condition: excellent (used), 2x Fristam FKFS40 Lobe pump Hodewf Nkvopfx Akijw 2.2 kW Small difference in the delay between the pumps Excellent condition

Year of construction: 2012, condition: used, For Sale: Ishida DACS-W-030-SB Checkweigher – Excellent Condition We are offering a high-quality Ishida DACS-W-030-SB Checkweigher for sale, designed for efficient and precise weight control in a variety of production environments. This checkweigher is in excellent condition, thoroughly maintained, and ready for use. Key Features: - Weighing Platform Dimensions: 530mm x 300mm - Automatic Reject System: Ensures accurate sorting and removal of out-of-spec products - Brand: Ishida – known for their reliable and durable weighing solutions - Model: DACS-W-030-SB – A top-of-the-line model for optimal performance Hsdpfxjv Sqxis Akiow - Ease of Integration: Can be easily integrated into your existing production line - Precision & Reliability: Ideal for food, pharmaceutical, or industrial applications Whether you are looking to upgrade your quality control processes or improve overall production efficiency, the Ishida DACS-W-030-SB Checkweigher offers a proven solution. For more information or to schedule a viewing, please contact us. *STC just acquired this equipment. While we currently received a lot of new stock we didn't find the time yet to do any work to it. Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine. If you are interested obviously feel free to contact us so we can gather more information for you. Weighing Platform Dimensions: 530mm x 300mm