Hydr. pressbrake

TRUMPF TrumaBend V 50

Year of construction: 1996, condition: ready for operation (used), A hydraulic CNC press brake Trumpf is available. Press force: 500kN, stroke: 215mm, max. operating pressure: 290bar, frame width: 1040mm, working width: 1270mm, installation height: 385mm, back gauge: 860mm. Machine dimensions X/Y/Z: approx. 2000mm/2100mm/2400mm, weight: approx. 4750kg. Documentation available. An on-site inspection is possible. Expected to be available end of May 2026. Hjdpfxoyi E Dre Afnjfc

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Hjdox Dayiepfx Afnofc Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ with vacuum buffer tank Movable on castors Tilting press table Vacuum pump motor: 0.75 kW Vacuum regulator with digital display

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 50 t, working width: 1,200 mm, number of axes: 4, overall weight: 4,750 kg, total length: 2,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 8 kW (10.88 HP), input voltage: 400 V, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, foot remote control, For sale: Used TRUMPF TrumaBend V50 press brake, year of manufacture 1997. The machine is in excellent technical condition and is highly reliable. Very precise and repeatable. In February 2024, all valve seals, safety valves, and hydraulic oil with filters were replaced by authorized service. The machine has a very low number of operating hours. Equipped with wiring for ACB sensors. Hydraulics: Hoerbiger Tool type: hydraulic Wila / Trumpf Control unit: DELEM DA65 Number of axes: 4 - Y1, Y2, X, R Hfsdpsx Rcf Defx Afnjc Number of back gauge fingers: 4 Machine number: 881125 Model: TrumaBend V50 Year of manufacture: 1997 Maximum pressing force: 500 kN Working length: 1200 mm Power: 8 kW Voltage: 400 V Hydraulic system pressure: 290 bar Weight: 4750 kg Overall length: 2500 mm Overall width: 2000 mm Overall height: 2100 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,500 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.5metre Press Brake For Sale Brand: Trumpf Type/Model: Trumabend V 50 Year:2000 Trumabend V 50 Hedpjx Nip Hefx Afnsfc Technical details Capacity: 50ton x 1.5metre: Folding length: 1500 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; Hjdpfx Asw Hca Hjfnjfc • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Hodpfxor D Sdgo Afnsfc Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Height: max 1,800 mm Hodpfxeqqkx Ne Afnjfc Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge Hfjdpfxji Igi So Afnsc • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 5 t span width: 21000 mm stroke speed: 8,0 precise lift: 0,8 m/min rope diameter: 14 mm connected load: 10,2 kW Hfodpfou Nvg Djx Afnsc SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 100 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 71 A2, travel speed 2,5 m/min. Size of travel wheels Ø 170mm (16 pieces) Trolley main hoist EKDH 525 H12 KV3-2/1 F10; type KBV 71 B8/2; travel speed 20,0 / 5,0 m/min.; size of travel wheels Ø 125mm (4 pieces) Hoisting gear: type KBH 125 B4; lifting height 12.000 mm; braked with displacement runner; lifting speed (main stroke 8,0 m/min. and fine stroke 0,8 m/min.) single hook size 2,5 rope Ø 14mm; rope length 28.3 m; power unit group FEM 1 AM Operation via pushbutton pendant control with DST Special feature: traversing piece with interlock and stitch tracks + infrared There are more bridge cranes with a 21-meter span for sale. *

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table Hfedpfxsrz Nfls Afnec - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced