Press Brake

TRUMPF V 85

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Hnsdpfoy Ix Ipsx Aagjl Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Hnodpsw Hx Tvsfx Aagsl Power 1.85 kW Bending speed 10 rpm.

Condition: good (used), Year of construction: 2002, functionality: fully functional, stroke length: 365 mm, throat depth: 410 mm, Hydraulic Press Brake Hnsdpfoy R Arkex Aagel Make: TRUMPF Model: TrumaBend V85 Year: 2002 Technical Specifications Manufacturer: Trumpf Model: TrumaBend V85 Year of manufacture: 2002 Press force: 85 t Stroke: 365 mm Bending length: 2050 mm Frame gap: 1750 mm Throat depth: 410 mm Table width: 120 mm Working height: 1050 mm Dimensions (approx.): L 2.6 x W 1.80 (plus 0.5 m support arms) x H 2.90 m Weight: approx. 9,050 kg Equipment • Control: Delem DA 2D Graphic • 2 movable support arms • Pneumatic die shifting • Hydraulic tool clamping, top and bottom • CNC-controlled crowning • Controlled axes: X1, X2, R1, R2, Z1, Z2 • Gooseneck upper tool, 86°/R1, H 120 mm, L = 1,960 mm, segmented • Straight upper tool OW202/K 28°/R1, H 120 mm, L = 1,935 mm, segmented • Lower tool V10/84°, R1, H 100 mm, L = 2,050 mm, segmented • Lower tool V24/80°, R 2.5 mm, H 100 mm, L = 2,000 mm, segmented • Lower tool V16, L = 1,000 mm • Lower tool V30, L = 500 mm All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Hnsdpsw Imq Rjfx Aagel

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass Hedpfxedvn E Ue Aagenl 1200mm up to 1900mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Hydraulic press brake Make: TRUMPF Model: TrumaBend V85S Year of manufacture: 2001 Technical specifications Manufacturer: Trumpf Model: TrumaBend V85 S Year: 2001 Pressing force: 85 t Bending length: 2550 mm Throat depth: 420 mm Stroke: 215 mm Dimensions: L 3.1 x W 1.80 (plus 0.5 m support arms) x H 2.40 m Weight: 8.8 t Equipment Hnedpfoy Dr Ibsx Aagol - Controlled axes: Y1, Y2, X, R, Z1, Z2 - 2 movable support arms - CNC-controlled crowning - Hydraulic upper tool clamping system (Trumpf system) - Pneumatic die shifting - Delem 2D graphical control - Tool package: Upper tool, straight, H 140 mm, R 1 28°, L 2500 mm, segmented Lower tool V8/86°, H 100 mm, L = 2500 mm, segmented All specifications without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Hedpfx Aey Dpufeagsnl Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz Hodpfxsu Ix Dce Aagonl 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: Hnodpsxaa Ursfx Aagjl - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 1994, machine/vehicle number: 883050, functionality: fully functional, Dimensions: 257 cm width x 220 cm depth x 242 cm height Weight: 8,320 kg Max. pressing force: 850 kN (85 tons) Max. bending length: 2,050 mm Distance between uprights: 1,750 mm X-axis travel: 600 mm Stroke height: 220 mm Hnsdpfxoylh N Nj Aagel Controlled axes: X, Y, R, I Control system: Delem Equipment: 6 backgauges Condition: Technically sound, except for oil leakage Crowning: wedge-type crowning The machine is operational and in good overall condition.

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Laser height adjustment Working width 3100mm pressing force 220 tons Hnsdpouiwypjfx Aagsl with many tools

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 85 t x 2500 mm Weight: 9000 kg (without tools) Between columns: 2050 mm Service: In 10/2023, the pump was replaced by TRUMPF at a cost of EUR 10,000. Since then, the machine has operated approximately 200 machine hours. Hnjdpfjyxri Ijx Aagjl

Condition: ready for operation (used), Year of construction: 2001, number of axes: 5, This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Additional equipment • Top drive concept in two-cylinder design y1/y2 • Electro-hydraulic ram drive with proportional valve technology • Ram travel measuring system with spring deflection compensation via glass scales • Modern block hydraulics • Cnc backgauge system • Safe finger adjustment from the front • Self-centring, manual, hardened upper tool holder for vertical tool change • Hardened, manual lower tool holder • Programme-controlled lower tool displacement (i-axis) for 2 positions • Modern protective cover Machine Benefits Technical Machine Benefits • Oil cooler • Working width 2. 000mm Hnjdpfx Aox D Nkdoagsl Extra Information Special Equipment: Back gauge system 4 axes (X, R, Z1, Z2) Hydraulic and hardened upper tool clamping (Wila system) Hydraulic lower tool clamping (Wila system) CNC crowning BendGuard safety device 2 pcs. Support brackets Network No tools included

Condition: used, Year of construction: 2024, operating hours: 256 h, machine/vehicle number: PB14403, fuel type: hybrid, Weights Empty weight: 2.030 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 740 m Transport dimensions (LxWxH): 5.12x0.78x1.95 Additional information Hodpfx Ajtr H Hpeagsnl Please contact PFEIFER GROUP for more information

Year of construction: 2001, condition: good (used), Used Trumpf V series cnc pressbrake for sale Trumpf v85 2.5m x 85ton – 6axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Hnodpfx Aajf Txi Segjl Model: v85 Year: 2001 Total axis: 4axis back gauge / total axis 7 – y1 y2 x r z1 z2 and i axis Complete with: • Usb upgrade on the control • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 4axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition • Full length of top and bottom tooling – brand new Trumpf pressbrake tooling in stock available for sale Delivery to your works, installation and tuition with your operators available.