Laser cutting machine

TRUMPF TruLaser 5040

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 25,757 h, laser power: 7,000 W, sheet thickness (max.): 30 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Table length: 4,000 mm Table width: 2,000 mm Max. sheet thickness (steel): 30 mm Max. sheet thickness (stainless steel): 30 mm Max. sheet thickness (aluminum): 25 mm MACHINE DETAILS Control: Siemens Sinumerik 840D SL Laser source model: TruFlow Laser power: 7,000 W Operating hours Laser on-time: 56,691 h Beam on-time: 25,757 h EQUIPMENT - PierceLine - FocusLine - NitroLine - PlasmaLine - Cutting head with 250 mm lens - Universal quick-change unit (UTI) with system bus - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Automatic nozzle changer - High-speed head - Water cutting head (Cooline) - CO laser TruFlow 7000 with optimized standby mode - Maintenance-free turbo radial blowers - High-frequency excitation - Laser control TASC Gijdpfex S Hmbjx Admol - Laser power regulation - Laser logbook function - CE marking Dismantling and loading can be offered by the seller for an additional charge.

Condition: ready for operation (used), Size: max 750 x 1.050 mm min 40 x 75 mm Gisdpjd N D Nvofx Admol section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Weight: 850 kg (approx.)

Condition: used, Year of construction: 2016, Trumpf Trulaser 5040 Type L69 Flat Bed Fiber Laser Cutting Machine, Sheet Size 4000 x 2000mm, Trudisk 800i (FD25) Fiber Laser, L4221N0240, Riedel PC501 Chiller, Trumpf Loadmaster. S/No. N0014A0345, Trumpf Campfil MF8.6 Dust Collector, Riedel L o/5 TR3.26B Chiller, Trumpf 05.21.00 Operating System, Laser Capacity 8000W, Working Range 4000 x 2000mm (X & Y), Z Axis 115mm (2016) Gjdpfxsx T Dblo Admoil Location: Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, functionality: unexamined, Year of construction: 2008, control type: CNC control, degree of automation: automatic, controller manufacturer: Trumpf, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser power: 5,000 W, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Gsdpfx Adsx N Nkwjmeil Bid now – Sale to the highest bidder. Lot 2910012: Complete industrial-grade laser cutting system, consisting of a TRUMPF TruLaser 5040 with 5 kW TruFlow CO₂ laser source, a Handte MF-L filtration unit, and a Schmalz vacuum lifting crane. Suitable for high-performance sheet metal cutting of steel, stainless steel, and non-ferrous metals. Machine: TRUMPF TruLaser 5040 Laser power: 5,000 W (CO₂) Year of manufacture: 2008 Power supply: 400 V / 50 Hz, 105 kVA Fuses: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar N₂ connection: 30 bar O₂ connection: 20 bar Laser source: TruFlow 5000, manufactured on 15/05/2008 Filtration unit: Handte MF-L 50/10/1, 2,500 m³/h, 355 daPa, 50 m² filter area, year of manufacture 2008 Vacuum crane: Schmalz vacuum handling system Control: CNC with integrated operator panel Condition: Regularly serviced, overhauled in 2025 Operating hours: 50,187 (as of 02/2025)

Condition: good (used), Year of construction: 1982, FOR SALE Heidelberg GTP is a platen press (format 34 x 46 cm) designed for hot foil stamping (Prägen) and embossing. Renowned for its double rotary arm feed system. Main technical features Functions: Hot foil stamping, embossing, die-cutting, creasing, and perforating. Unlike the standard GT model, the GTP often lacks an inking system to prioritize pressing force. Sheet size: Maximum 340 x 460 mm; minimum 85 x 102 mm. Pressing force: Up to 60 tons, featuring a reinforced structure compared to pure printing models. Speed: Up to 4,000 sheets per hour. Weight: Approx. 2,250 – 2,300 kg. BT MACHINES PURCHASE AND SALE Godpox Imizofx Admjil ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 17,528 h, machine/vehicle number: A3251E0049, laser power: 6,000 W, overall weight: 11,700 kg, Equipment: CE marking, documentation/manual, safety light barrier, Eladó egy folyamatosan karbantartott TruLaser 5040 száloptikás (L76) lézergép. 17528 üzemóra! 6000W teljesítmény. Munkafelület: 4000X2000mm Mozgatóegység nagy pontosságú megmunkáláshoz. Gantry hajtás lineáris direkt hajtással kombinálva Automatikus asztalváltó hosszirányban Zárt sugárvezetés optikai kábellel (LLK) TruDisk tápellátása a gépen keresztül Széles hosszirányú szállítószalag Ergonomikus kezelőpanel színes érintőképernyővel, Pozícionáló lézerdióda Olajpermetező rendszer, PierceLine, FocusLine, NitroLine, BrightLine Fiber, Teljesítménycsomag, Nagysebességű vágócsomag, Automatikus fúvókatisztítás, TRUMPF lézer: Külső TruDisk 4001 szilárdtest lézer 1 LLK csatlakozással Vágóegység: Univerzális vágóegység teljesen adaptív lencserendszerrel Vezérlés: Sinumerik 840D SL Sárgaréz vágócsomag, Sárgaréz vágócsomag, Többlapos megmunkálás Giodpswivcgsfx Admol Microweld, FastLine, AdjustLine, FlyLine, Teleszerviz interneten keresztül (Távoli támogatás), Állapotútmutató Adatátvitel: Vezeték nélküli kezelőpont (alapként a mobilvezérlő alkalmazáshoz és a vizuális online támogatáshoz) Biztonság: Fénysorompók, Többkamrás elszívórendszer, Integrált kompakt porelszívórendszer, Elektromos görgős tető Különleges jellemzők: Smart Nozzle Automation, Smart Beam Control, Nagysebességű Eco vágócsomag, DetectLine, Széles keresztirányú szállítószalag billenő tartállyal, Integrált 1. kamera a munkaterület felügyeletéhez és az egyedi képek hálózatba történő továbbításához, Integrált 2. kamera a munkaterület megfigyelésére és az egyes képek hálózatra történő továbbítására, Drop&Cut, Smart Collision Prevention, Dot Matrix Code, TruTops Boost. Adatátvitel: RCI távirányító interfész. A gép folyamatos használatban van, helyszíni tesztelés biztosított.

Condition: used, Year of construction: 2012, TRUMPF TruLaser 5040 6kW Laser, manufactured in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded, and maintained throughout its entire operation period. The TRUMPF TruLaser 5040 (L18) laser cutting machine is designed for precise cutting of sheet metal made from materials such as steel, aluminum, copper, and brass. Laser cutting is performed using a stable 6 kW laser beam generated by a high-efficiency resonator. A range of additional systems streamline the machining process while enhancing cutting quality. The entire cutting process is fully automated, thanks to the automatic pallet changer system. This system enables simultaneous loading and unloading of workpieces during operation, thus increasing productivity and minimizing machine downtime. The TruLaser 5040 is offered with extensive equipment, including additional cutting heads and an advanced CNC controller with many useful features. In September 2022, the complete set of quartz tubes, all internal optics, and the lamp were replaced. The external optics were cleaned and calibrated in September 2025. Filters and oils were changed according to TRUMPF’s recommendations. Once a year, the water was changed along with flushing the CU and AL circuits. All these procedures are documented with proper service reports. Both original lenses for both heads and an optics case are supplied with the machine. Technical specifications of the TRUMPF TruLaser 5040 laser cutting machine: - Laser power: 6 kW - Travel (X/Y/Z axes): 4000/2000/115 mm - Maximum cutting thickness (mild steel): 25 mm - Maximum cutting thickness (stainless steel): 25 mm - Maximum cutting thickness (aluminum): 25 mm - Maximum cutting thickness (copper): 10 mm - Maximum cutting thickness (brass): 10 mm - Operating hours: 51,839 h - Machine on-time: 79,497 h - Compressed air connection: 7-10 bar - Nitrogen (N2) supply: 30 bar - Oxygen (O2) supply: 20 bar - Connected load: 120 kVA - Machine power supply: 400 V; 50 Hz TRUMPF Laser Cutter Equipment: - CNC control: TRUMPF - Laser source: TRUMPF TruFlow 6000 - BrightLine system (improves quality of thick sheet cutting) - FlyLine system (fast hole cutting in thin sheets without pre-piercing) - PierceLine system (monitors and controls piercing process, reducing duration by up to 80%) - 250 mm cutting head - 175 mm cutting head - Automatic pallet changer system Godpfx Adex Nil Iemeil - Cutting with compressed air, nitrogen or oxygen - Longitudinal conveyor belt

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Gedpfxerb Afae Admeil Standard version Automatic tool changer with 10 positions, mounted in the machine column

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM Gsdpfx Aexqtx Sedmeil X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: excellent (used), Year of construction: 2022, Flatbed 8 kW Fiber Laser Cutting System – Maxi Format ONLY approx. 1,500 operating hours 8,000-watt fiber laser Available immediately Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L76) Year of manufacture: June 2022 Working area: 4,000 x 2,000 mm (maxi format) Laser power: 8,000 watts, solid-state (fiber) Control system: SINUMERIK 840D SL Operating hours, approx.: Laser beam on: 1,500h; Machine on: 4,000h (as of July 2025) TECHNICAL DATA: Dimensions: Length: 11,200 mm; Width: 6,373 mm; Height: 2,200 mm Weight, approx.: 14,300 kg Working area; X, Y-axis: 4,000 mm x 2,000 mm Max. workpiece weight: 2,000 kg Laser power: up to 8,000 watts Max sheet thickness: Mild steel: 32 mm (increased sheet thickness package) Stainless steel: 40 mm Aluminium: 25 mm Copper: 10 mm Brass: 10 mm Average power consumption in production; TruDisk 8001, 17 kW Gjdpew U Ecxjfx Admsil SPECIAL EQUIPMENT: External solid-state laser TruDisk 8001 with 1 fiber optic output featuring SmartBeam Control EdgeLine Bevel (license fee may apply, only in conjunction with TruTops Boost) CoolLine with continuous water supply Connection for additional cutting gas Cutting package for increased sheet thickness Cross conveyor (right side of the machine) Cleaning brush CO2 extinguishing system for compact dust extractor Exhaust duct adapter for compact dust extractor OPC UW for Machine Tools basic (unmatic, license may be required) EXTENDED Standard Equipment: Support bars made of mild steel (67 mm spacing) TruDisk power supply via machine Compact dust extractor Production transparency TruTops Monitor incl. initial setup for 1 machine, 1 client DetectLine Drop & Cut Smart Nozzle Automation Automatic longitudinal pallet changer Operating environment temperature 5 to 35 / 45 °C FEATURES: Machine: Fully enclosed machine frame Gantry drive with linear direct drives Enclosed laser beam guidance via fiber optic cable Chiller unit for machine and laser (water-air) Longitudinal conveyor belt Integrated control cabinets Integrated cabinet Work area lighting Positioning laser diode Spray device Automatic nozzle cleaning Machine status indicator Cutting Unit: 1-cutting head strategy Universal cutting unit with fully adaptive lens system Protective glass Online protective glass condition monitoring Automatic nozzle centering Dynamic focus control Control System: Sinumerik 840D SL Fast reproduction Integrated technology data Automatic shut-off Programmable cutting gas/pressure selection Microweld Production planning Remote support interface Multi-sheet processing – Condition Guide Cutting Guide Ergonomic 21.5" wide-screen multi-touch control panel Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine FocusLine Copper cutting package Brass cutting package HighSpeed cutting package PlasmaLine – BrightLine fiber Performance melt cut package Data Transmission: USB interface RJ45 network connection Central Link Online Update Manager TRUMPF Laser: Highspeed ECO Excitation via pump diodes Laser power control New price over €800,000 This used machine can be inspected under production conditions. All information without guarantee – sale excludes all warranties and guarantees. Subject to prior sale.

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Table length: 9000 mm Gjdewc Ndwspfx Admoil Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008