SURFACE PLANER STETON PF530E

STETON PF 530E

Condition: used, Technical data: Max planing width: 530 mm Fedpsgykh Hefx Aikspp Number of knives: 4 Total length of the tops: 2730 mm Electric height adjustment of the tops Culaga tilting Safety switch Power supply 400 V Engine power: 4 kW Producer: Steton Overall dimensions: Length: 2730 mm Width: 1040 mm Height: 1040 mm

Condition: excellent (used), functionality: fully functional, Centauro CO700 Band Saw Fpodpfx Aievyp I Sekop Saw wheel diameters 700mm Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Year of production 1997

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Fjdpfx Asua Tbwjikopp Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls Fpedpfx Ajh Nvyzjiksp -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, Year of construction: 2024, New machine Fjdpsxtgz Eefx Aikjpp Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Fpedpsn Argiofx Aiksp Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, functionality: fully functional, Year of construction: 2026, LOADING, UNLOADING, LOADING DOCK, ACCESS, MOBILE RAMP 15T RAMP, 2M WIDTH TM-GROUP ONE OF THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tons - Internal ramp width: 2150 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Raid Lattice: - Galvanized grid with anti-slip grooves. Reliable and safe base. The forklift and pedestrian traffic are guaranteed the best possible grip and solid support. ✅ Handle for a forklift (can be installed on both sides): - Convenient and quick attachment for a forklift allows the ramp to be transported in all directions. The specially designed handle allows you to maneuver the ramp even in confined spaces. ✅ Additional adjustable or fixed safety supports - Work safety is essential, the ramp is equipped with a support system known from truck semi-trailers. Solid legs guarantee a stable base under the transported load. ✅ Chain to connect to a truck, wagon or fixed storage ramp A solid steel chain is another advantage of our ramp, additionally the protection excludes the possibility of the ramp moving during loading work. Fjdpfxsmt D Sbe Aikspp ✅ Solid side rails: - Safety barrier with the possibility of unscrewing and installing a frame/roof (the roof is optional) ✅ Electric control of ramp height: - The smooth electro-hydraulic drive uses a high-end 230V pump. ✅ Double sided hand pump: - Hydraulic pump for height adjustment when it is not possible to connect to the electro-hydraulic power supply - two-sided lifting. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Fpodpfx Asittnzsikjp Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Fpodpfxexbnyrs Aikjp Year of manufacture: 2005

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Fpedpfxot Rp Hxs Aikop Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate