Ram-Type Floor Boring and Milling M/C

SKODA W200

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Kfodox H N Abspfx Aa Eja Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross-section: 530 x 550 mm Table load: 20 t Plate field size: 16800 x 5500 mm Tool holder: SK 60 Approx. machine weight: 173 t Additional information: - Additional equipment: large and small angular head - Offer number: 22979 - Table is the S20 MP model, table size: 2200 x 2500 mm - Machining width on the machine X-axis (X-Way): 6000 mm - Including 6 plates, each 5600 mm x 1850 mm

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping Kfjdpfx Aajxcgtgs Eea - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. It can be connected and tested under power. Kfsdpfxoxwl Tbo Aa Eoa Very good condition. X 11,500; Y 3,150; Z 2,000; clamping system M 100. Includes support column, 6 plates sized 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approx. 200,000 kg.

Year of construction: 1987, condition: good (used), technical data: X-way 11500 mm Y-way 4500 mm Spindle diameter 200 mm Kfedpfx Aohx Euksa Eoa

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Kfsdpfx Aaow I D Dus Eja Name of the machine: Miyano ABX-64SYY

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Ksdpfox H Nzwex Aa Ejfa Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 08063406 3441, roller (bottom) diameter: 265 mm, roller (top) diameter: 285 mm, roller length: 3,100 mm, sheet thickness steel (max.): 15 mm, overall weight: 8,000 kg, total length: 5,300 mm, total width: 1,200 mm, total height: 1,700 mm, power: 14.71 kW (20.00 HP), type of input current: three-phase, Equipment: emergency stop, Roll bender for sale from a private individual. Rolling capacity 5xD = 15 Kfodpfovl H Rbjx Aa Eja Prebend capacity 5xD = 12 Prebend capacity 1,3xD = 9

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] CROSS SLIDE 1 - Number of positions : 5 Kedpfxsuq A T Sj Aa Esfa CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw Kjdpfxjuhb D Ao Aa Esfa - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - 18 mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm Kfedpeqv Iw Tsfx Aa Eea - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE