Blow Molding Machine

Sipa SFR8

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Lrjdpjztwmfjfx Ac Ajt

Condition: as good as new (ex-display), Year of construction: 2022, Two-axis positioner for Kuka industrial robots Lsdpfolhr H Hex Ac Asrt Maximum load capacity: 500 kg Positional repeatability: 0.1 mm Overall height: 982 mm Tilting range: +/- 93° Rotation range: unlimited Installation position: floor-mounted Rated welding current (100% duty cycle) = 500 A (60% duty cycle) = 600 A

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included Lrodpfx Aeiryyajc Aet TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Lsdpfxjwa Rhrs Ac Asrt Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Lrodpfxor Dd H Sj Ac Ast

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Lredpfxswf Dvae Ac Ajt Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Lredpfeutni Rox Ac Aot Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Lsdpfx Astrbrqoc Asrt

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Lrodpfeyhbt Hox Ac Ajt Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Lrsdpfsv Nkz Ejx Ac Ajt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.