Welding Table

SIEGMUND - System 22 Prof Extr 8.7 - 1500x1500

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Bodemhm Aqspfx Akiodi Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: new, cutting diameter 225 mm Bdjdpfjgxi D Tox Akiei saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, WMD25LV - 230V / 1Ph Bdsdpfoga T Eiex Akioi Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 540 KG Bsdpfx Aksga T Dpoiodi Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). Bodpfxjwd Emke Akiodi If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Bdsdofwmydjpfx Akiji Height, mm, 1300, Weight, kg, 1350,

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm Bedpfx Ajvbk Rwjkijdi stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: new, Year of construction: 2026, load capacity: 3,000 kg, Top quality made from high-strength structural steel Q355, including plasma nitriding and scaling. 3D perforated table 2400 x 1200 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Machined flat, very robust, weight approx. 950 kg. With table leg adjustable in 4 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. Bdodpfx Aex Nih Nekisi

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, controller manufacturer: TRUMPF, controller model: TASC 6000, pressing force: 173 t, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm Bsdpfx Aoza U Nfekiedi

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Model: S25 Extruder Serial number: EX-006-S25 Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Input current: 32 A Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Bodpfx Aey Nk S Njkiodi Recommended RCD: 30 mW Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. If you have any questions or need more information, feel free to send us a message or give us a call.