Eccentric Press - Single Column

EBU HK 200 FR

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. Gbodpsicbbzjfx Amzep The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity Gbedov Hg Euopfx Amzsp - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Gbodsfx Hv Hspfx Amzep hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, fuel type: diesel, Manufacturer: CATERPILLAR Type: V 250 Capacity: 12000 kg Lift Height: 3710mm Boom height: to insert moulds of fork length: 1400mm width: 2550mm Gjdpsc Urcisfx Amzobp Overall length: 6400mm

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed Gbjdpfexdmgvex Amzsp We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Gbedpfory Trpox Amzep Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm Gbjdpfxsx E Eihj Amzsp MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø Gedswvir Ijpfx Amzebp 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email! Gsdpjt Ucpbofx Amzjbp

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Godewz Rg Djpfx Amzsbp Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Accessories: - Measuring system - Tailstock - Coolant system - Documentation