Blowing Machine SIDEL

Sidel SBO 6

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Cjdog Ailcjpfx Ac Terg Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label appli... Credpfxoydn A Hj Ac Tog

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Credpfox A Uu Eex Ac Tsg Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2012, machine/vehicle number: LC647, Used Sidel filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblock: Sidel EUROPA WM, 60 valves / 15 capping headsLabeler: Krones Contiroll HSCap feeding: Sidel Aidlin 24 cap feederLine year: 2012 (core filler unit 2011)Advanced Automation & Control SystemsThe line integrates synchronized control between the blow molder, filling monoblock, cap feeding, and labeling systems to maintain stable, high-speed operation. Central operator interfaces coordinate start/stop sequences, speed ramps, and fault diagnostics. Safety interlocks, guarding, and emergency stops protect operators while ensuring consistent uptime. Quick adjustments and recipe-based parameters support repeatable setups for the 0.55L format, minimizing changeover downtime and optimizing overall equipment effectiveness.Production Line Integration CapabilitiesEngineered for inline operation, this PET bottling equipment connects via conveyor systems with accumulation and transfer sections for smooth product flow. The configuration supports still water applications with the 30/25 PCO1881 neck finish, enabling efficient handling from preform feeding and blow molding through filling, capping, and wrap-around labeling. The system architecture allows integration with upstream and downstream equipment such as inspection, case packing, and palletizing to form a complete beverage production and industrial packaging solution.Machine Condition & Maintenance HistoryThe line is still in production, indicating maintained operability and continuous performance under real operating conditions. Components have been kept in working order to support ongoing output. This second hand PET water line benefits from active status, helping prospective users evaluate performance and plan for a smooth transition to new production requirements.Operational Performance & VersatilityOptimized for still water, the Sidel EUROPA WM monoblock combines precise filling with consistent capping torque control across 15 heads. The Sidel SBO20 blow molder provides reliable preform heating and stretch-blow performance across 20 cavities for stable bottle quality at high speeds. The Krones Contiroll HS delivers continuous, high-speed labeling accuracy suitable for demanding PET beverag... Credpfx Acjzc Hqmo Tog

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Crodpfx Acoyb Tuis Tsg Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details - Leistung: bis zu 50.000 bph - Bauart - Rotierend - Arbeitsrichtung gegen den Uhrzeigersinn (r-l) - Modulare Maschine - Höhe des Förderbandes: 1150 mm - Etikettentyp: Kaltleim Csdpfxsv I Tnxo Ac Terg - Position des Etiketts - Brust/Hals - Stanniol - Körper - Rücken - Siegel - Flaschenformate - 0,25l Vichy-Flasche - 0,5l GDB - 0,7l GDB - 0,75l Gastro-Flasche - Anzahl der Aggregate: 3 - Teilkreisdurchmesser: 1800 mm - Anzahl der Flaschenteller: 45 - Teilungsdurchmesser: 125,6 mm - Ausrichtung der Flaschenteller über Danfoss-Servoantriebe - Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf - Stoppstern am Einlauf - Leimwalzen aus Stahl - Vorbereitet für Flaschenausrichtung durch Kameraerkennung - Heissleimwerk für Siegeletikett von Robatech - Heissleimdüse an der Etikettierstation montiert - Siemens S7 - Technische Dokumentation vorhanden Lieferumfang - Datumscodierer - Leimpumpen Unipump H (heizungsgesteuert)

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data - Capacity: - 7,600 bph on 1.0 L - Formats: - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: Credpfeyb Tbpjx Ac Tsg - Quick change for shell molds - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed Credpfx Acszlqzme Tsg - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Available from 12 October 2026. Location: Italy.

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 Crjdpfx Aszxtzioc Teg - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.