Used Sidel complet filling line for water, PET 36000 BPH

Krones

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data Manufacturer: Krones AG Machine Type: Filling and capping monoblock Model / Identification: Krones Modulfill Year of Manufacture: 2012 Application: Filling and closing of glass bottles Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) Filling System: Volumetric filling Filling Valves: 60 Capping Heads: 12 Closure Type Observed: Plastic screw cap Target Output: approx. 15,000 bottles/hour Operating Hours: 41,381 h Production Counter: 40,754 h Control Interface: Krones iPanel CD Electrical Supply: 400 / 230 V Current Type: AC 3/N/PE Frequency: 50 Hz Full Load Current: 36 A Construction: Stainless steel and glass safety enclosure Condition: Used, observed in operational production environment Gisdpfx Aozcga Ujbksu

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Gsdpfx Aeyhbmtsbkjiu

Condition: used, Year of construction: 2019, operating hours: 5,300 h, machine/vehicle number: LC640, Used KRONES Contiform 312 Pro complete line for PET 24000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for high-efficiency PET bottle production and includes a Krones Contiform 312 Pro stretch blow molding system with matching auxiliaries. Designed for industrial packaging and beverage production environments, it delivers reliable output for second hand operations seeking robust performance and quick integration.Production speed: 24,000 bphManufacturing year: 2019Operating hours: 5,300Main machine: Krones Contiform 312 Pro (12 cavities)Bottle formats: Compatible with 0.235L and 0.78L bottlesNeck finish: 38 mm (convertible to 28 mm)Container types: Designed for PET bottle handlingTechnology: 3rd generation platform, IR preform heating, servo-driven stretchIncluded components: AF Compressors high-pressure compressor and dryer, KKT chillers WTS 70 water chiller and cooling tower, Krones preform dust remover, preform hopper, Contifeed preform feeder, Preform Check inspection, 56 m air conveyor, electrical cabinetCompressor (AF Compressors 13A): 12.5 m³/min free air delivery; 35 bar operating; 37 bar design; 125 kW; 750 rpm; 400 V 50 Hz; ~4,420 kgChiller (KKT chillers WTS 70): 4.6 kW max input; 8.2 A; 400 V 3Ph 50 Hz; 10 bar max water pressure; ~750 kgAdvanced Automation & Control SystemsThe line leverages the Contiform 312 Pros advanced automation with servo-driven stretch motion and precise IR heating zones for consistent preform conditioning. An integrated electrical cabinet provides centralized control for the blow molder and auxiliaries. Quick format adaptation supports efficient SKU changes while maintaining repeatable settings and stable output.Centralized electrical cabinet for coordinated line controlServo-driven stretch for accurate, repeatable bottle formationIR heating for uniform preform temperature profilesMachine safeguarding for operator protection and safe accessManuals available to support operation and maintenanceProduction Line Integration CapabilitiesThis used bottling line is built for seamless integration into broader beverage production and industrial packaging systems. The 56 m air conveyor ensures smooth transfer of lightweight PET bottles from the blow molder to downstream equipment such as rinsing, filling, capping, and labeling.Inline operation with upstream preform logistics and downstream bottling equipmentPreform handling suite: dust remover, hopper, and Contifeed feederInspection module (Preform Check) for preform quality assuranceFormat flexibility: 0.235L and 0.78L; neck 38 mm with conversion option to 28 mmMachine Condition & Maintenance HistoryThe line is still under power, supporting testability and rapid recommissioning. With approximately 5,300 operating hours and complete documentation, it represents a reliable second hand solution for pla... Gedpfjzb Iinjx Abkoiu

Condition: used, Year of construction: 2003, Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data Manufacturer: Krones AG Machine Type: Blitzpac case packer / bottle packer Machine Description: Blitzpac Einpacker 23/0673/006 Year of Manufacture: 2003 Application: Packing of PET bottles into crates Pack Format: 12-bottle crate Capacity: approx. 2,700 crates/hour Control / HMI: MTS 10 operator panel Bottle Handling: Mechanical / 7pcs. pneumatic matrix gripper for multi-row bottle handling Condition: Used, observed in industrial production environment Gjdpfozb Aghjx Abkeiu

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Gijdpfxow Ahfys Abkou Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. T...

Condition: used, Year of construction: 2014, Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection Reject systems: Foreign container rejection at infeed Contaminated bottle rejection at discharge Separate rejection for bottles with damaged finish or thread Direction of operation: Left to right Gisdpfx Aozb Afqjbkju

Condition: used, Year of construction: 2012, Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till early 2027. As the selling mineral water company is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Technical Details Output: 20,000 bph Formats: 0,25l Vichy 0,5l 0,7 and 0,75l GDB and Schlegl Pitch circle diameter: 600 mm No servo drive of the plates Infeed and output direction 90° Rotation: counter clockwise 36,000 operating hours Glue pumps included working direction: counter clockwise Gjdozb Afdspfx Abkjiu

Condition: used, Year of construction: 2026, Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data Capacity: up to 48,000 bph (500 ml PET) Formats: 500 ml PET bottles Application: Blowing, filling and capping of PET bottles Configuration: Rotary stretch blow moulding machine SBF412 (2-cavity configuration) Electronic-volumetric filler with 120 valves Fully electronic capper (FEC) with 20 heads Neck finish: 26/22 GME 30.40 Cap type: Plastic screw flat / press-on caps Filling technology: Electronic-volumetric Products: Carbonated water, still water, carbonated soft drinks CO₂ content: up to 8.5 g/l Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks) Scope of Delivery Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves Capper | Acmi | FEC | 20-head capper for screw and press-on caps Cap Feeder | Operator level waterfall orientation and feeding Preform orienter |Operator level preform feeding Preform insertion control | Control system Blowing air recovery system | For pre-blow and line Cooling system | Water recirculation on combo interface Automation package | PLC teleservice, Ethernet, UPS, remote access Lubrication system | Automatic centralized lubrication Foaming unit | Automatic system Giodpfx Aboyzc Hpekju

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-chain conveyor and crate transport sections Drive System: Electric drive motor with gearbox Inspection Access: Viewing window with safety latch hooks Control System: Integrated electrical control cabinet Operator Panel: Push-buttons, indicator lights and red rotary main switch Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A Giodpfx Aszb Ad Tjbkeu

Condition: used, Year of construction: 2003, Overview This Krones Robot 3A unloading robot, manufactured in 2003, is designed for the automatic handling of full beverage crates on Euro pallets. The system is used for unloading complete crate layers from pallets. The machine handles actually 1.0 l PET crates in an 8-crate layer pattern and is configured for crates with dimensions of 400 x 300 x 310 mm on Euro pallets measuring 1200 x 800 x 144 mm. During operation, a mechanical gripper head lifts a complete layer of beverage crates from the pallet and transfers it horizontally within the unloading area. The system is equipped with an MTS 10 operator panel, showing program operation and pallet handling status. The working area is protected by safety fencing and access doors. Technical Data Manufacturer: Krones AG / Kettner Machine Type: Robot unloading system / crate depalletising robot Machine Designation: Kettner Robot 3A Year of Manufacture: 2003 Application: Automatic unloading / depalletising of beverage crates Layer Pattern: 8-crate scheme Crate Dimensions: 400 x 300 x 310 mm Pallet Format: Euro pallet, 1200 x 800 x 144 mm Handling System: Mechanical gripper head for complete crate layers Operation: Layer-by-layer unloading from pallet HMI / Control Panel: MTS 10 Conveyor System: Pallet roller conveyor Safety: Protective fencing, grid access door, operator control box and emergency stop Electrical Supply: 230 / 400 V AC Current Type: 3-phase Frequency: 50 Hz Nominal Current: 37 A Condition: Used, installed in industrial bottling / crate handling environment Gisdpfx Aezb Adyebkou

Condition: used, Filler: 25 ventilsCorker: 4 headsFormat parts: Sterne & Einlaufschnecke 0,25l-0,375l / 0,75l Schlegel-Bordeaux / 0,75l Burgunder / 1,00l / 1,50l Giedsxytxdspfx Abksu

Condition: used, Year of construction: 2002, Overview This Krones / Robot 3A palletising robot, manufactured in 2003, is designed for the automatic palletising of beverage crates. The system is used to stack complete crate layers onto Euro machine handles actually 1.0 l PET crates in an 8-crate layer pattern and is configured for crates with dimensions of 400 x 300 x 310 mm on Euro pallets measuring 1200 x 800 x 144 mm. During operation, the mechanical gripper head picks up complete layers of black beverage crates and places them onto system is equipped with an MTS 10 operator panel, showing program operation, palletising status, and product configuration. The working area is protected by safety fencing and access doors. Technical Data Manufacturer: Krones AG Machine Type: Robot palletising system / crate palletiser Machine Designation: Krones Robot 3A Year of Manufacture: 2003 Application: Automatic palletising of PET beverage crates Layer Pattern: 8-crate scheme Crate Dimensions: 400 x 300 x 310 mm Pallet Format: Euro pallet, 1200 x 800 x 144 mm Handling System: Mechanical gripper head for complete crate layers Operation: Layer-by-layer palletising onto pallets HMI / Control Panel: MTS 10 Conveyor System: Pallet roller conveyor with pallet magazine / pallet handling area Safety: Protective fencing, grid access doors, operator control panel and emergency stop Electrical Supply: 230 / 400 V AC Current Type: 3-phase Frequency: 50 Hz Nominal Current: 41 A Condition: Used, installed in industrial bottling / crate handling environment Gjdpfx Abezb Ac Aeksiu

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data Line type: Returnable glass bottling line Application: Beverage filling in returnable glass bottles Formats: 0.33 L and 0.75 L glass bottles Packaging: Bottles in crates Filler capacity: 18,000 bottles/hour Premix capacity: 22,000 L/hour Closure type: Plastic screw caps Labelling: Wet glue labelling, 2 aggregates Main machine years: 1996 – 2016 Dismantling planned: February 2027 Scope of Delivery Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 Crate Decapper | RINK | KM 690/4K | 2012 Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 Empty Bottle Inspector | Krones | Linatronic | 2014 Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 Labelling Machine | Krones | Universella | 2012 Closure Inspection | Syscona | Expert FHK | 2016 Inspection System | Krones | Checkmat 731 | 2012 Crate Packer | Kettner | 1996 Crate Inspection | Krones | Checkmat 708 | 2011 Palletizer | Matec | Rotomat 3B | 2002 Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000 Gijdpfx Abjza Tx Sskju

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel blow molding Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel SBO 16 Series 2 Blow Molding Machine is a rotary PET blow molder engineered for reliable, high-quality container production within used bottling line and industrial packaging environments. Built in 2002, this second hand blow molder features 16 cavities for efficient, continuous operation. It is delivered with an air recovery system to improve energy efficiency and operating economy. A complete set-up for the Alaska neck finish is included, enabling fast start-up for compatible formats. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: SidelModel: SBO 16 Series 2Year: 2002Machine type: Rotary blow molding machineNo. of cavities: 16 (molds not included)Container material: PETNeck finish set: AlaskaAir Recovery System: IncludedChiller: Not includedAdvanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating and blowing cycles. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption during beverage production. Quick adjustments for the Alaska neck finish reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe SBO 16 Series 2 is designed for seamless integration into a complete beverage production line. It pairs effectively with filling and capping equipment for high-throughput second hand bottling applications and can operate inline with conveyors, inspection, and downstream packaging machinery. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters. It is compatible with monoblock and combi configurations, including gravity filling solutions and pick-and-place cap distribution systems.Machine Condition & Maintenance HistoryThe overall combi configuration associated with this blow molder was refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projects. As a second hand unit from a reputable manufacturer, this machine offers proven durability and straightforward maintenance with widely available spare parts and technical support.Operational Performance & VersatilityWith 16 cavities and a rotary architecture, this blow molding machine provides the throughput and consistency required for beverage production and other PET packaging tasks. The included Alaska neck finish capability allows targeted format production, while additional neck finishes can be accommodated with the appropriate tooling. The air recovery system improves operating efficiency, making it a strong choice for cost-optimized industrial packaging operations seeking lower compressed air usage without compromising quality.Installation Requirements & Site PreparationInstallation typically requires utilities common to PET blow moldi... Giodpfszccgdex Abkou

Condition: good (used), With top press-on rollers for levelling out staples Can be combined with a pallet brushing unit Infinitely adjustable test pressure Standard tests: Bottom boards and bottom crossboards, Lengthwise and crosswise mounted top boards Gjdpfxed R Eqpe Abksiu Indirect wedge inspection Optional tests: Dimension check, fork arm or area-clear monitoring, separate bottom board inspection of loaded pallet, direct wedge inspection If you need more information, please don't hesitate to contact us on the contact form or call us.