Milling Drilling Machine

SERRMAC HT Digit VR-TC

Year of construction: 2023, condition: as good as new (ex-display), Notching machine Boschert LB12/4 Machine colour blue Ral 5017 Cutting angle 90 Cutting capacity 4 mm St42 3 mm stainless steel Connected load 4kW Weight 760 kg Machine equipped with 2 stops with movable stop bar stop bar 300 mm inner stop for cutting strips up to 225 mm Tsdpfx Ajfgq Uieg Dof plexi protection CE and new machine guarantee

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 23 mm Todpfx Aet Hw Sbog Dof x-travel 400 mm y-travel 285 mm total power requirement 3 kW weight of the machine ca. 1.400 kg dimensions of the machine ca. m

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm Tedoupw Uzspfx Ag Dsf total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Tedpovt Svrjfx Ag Dof Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: good (used), Year of construction: 1987, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 105 mm, throat depth: 300 mm, distance between stands: 2,020 mm, overall weight: 4,000 kg, total length: 2,700 mm, total width: 1,500 mm, total height: 1,900 mm, power: 4 kW (5.44 HP), Bending length 2550 mm, capacity 80 to, gap between column 2020 mm, stroke 105 mm, throat gap 300 mm, motor 4,0 KW, back gauge 400 mm, control EMS MMP, dimension 2700x1500x1900 mm, weigth ca. 4000 kg, 2 cabinet with tools Tjdjw Nyh Sopfx Ag Dsf

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Tedpfxovfdats Ag Dsf Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW weight of the machine ca. t Todpet Hw U Njfx Ag Djf dimensions of the machine ca. m

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 730 x 210 mm connected load frequency 400 V boring feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank Tjdjupw T Djpfx Ag Def

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y Tedpfx Ageu Aq Amj Dsf - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: good (used), Drill with coordinate table and sliding head Brand: IBARMIA Model: B70P Capacity: Up to 70mm drill Characteristic: - Transmission: By gears. - Coordinate table with 2 X-Y axes. - Automatic advance. - Number of automatic advances: 6 - Number of speeds: 24 - Chap. max. drilling capacity in 70Kg steel: 70mm - Chap. max. drilling capacity in 200Hb cast iron: 80mm - Electromagnetic clutch - Automatic tool ejector - Motorized moving head - Bidirectional rotation. - Head travel: 1500mm - ANILAM digital X,Y coordinate display. Tjdpfx Ajh Rydneg Djf - Table tours: X570 x 260mm - Table dimensions: 500x1000mm - Manual oiler Cooling system using coolant. It is delivered revised and with the protections for CE compliance.