Caterpillar multiple-blade gang saw

SCM M3 300/120

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: Djdpfeyx Untox Acweur - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Dsdpfxjw I Uxcj Acweur Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), CATALOG NUMBER 7946 Technical Data: - Track width: 300 mm - Working width of shaft: 300 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 1030 mm - Table length: 1840 mm – Top: - Kickback protectors (anti-kickback barrier): 2 rows - Metal feed roller, pressure type - Kickback protectors - Metal feed roller, pressure type - Shaft with saw blades - 2 smooth metal feed rollers – Bottom: - Guide rail - Kickback protectors - Track - Laser - Central lubrication of track - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 18.5 kW - Extraction outlet diameter: 200 mm - Overall dimensions (L/W/H): 1900x1800x1600 mm - Weight: 1770 kg Advantages: – Italian made – With laser – Unpainted Duedpeyxrkrofx Acwor – In very good condition – Used multi-blade saw Net price: 55,900 PLN Net price: 13,300 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Dusdpfx Asx U Tp Iecwer Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Dodpfx Asdnxydecwour Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Duodpfx Ajwt Snyscwer

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW Dedorigxyepfx Acwour feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50 Dujdpfx Aovvl H Nocwor

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Dodpfxevu U Ito Acwour Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Dusdpfx Aefzzhyecwor Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !