2015 Biesse Rover A 2243 G FT

Biesse Rover A 2243 G FT

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 57269, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,205 mm, controller model: NC 1000, TECHNICAL DETAILS X-axis working range: 4,300 mm Y-axis working range: 2,205 mm Vertical spindle: 1 unit, HSK F63 Tool changer system: 8 positions (head) Tool changer system: 21 positions (rear, chain) Drilling head: BH 20 Vertical spindles on X-axis: 8 units Vertical spindles on Y-axis: 8 units Horizontal spindles on X-axis: 4 units Horizontal spindles on Y-axis: 4 units Saw unit on X-axis: diameter 120 mm Saw unit on Y-axis: diameter 120 mm MACHINE DETAILS Control: NC 1000 Software: Biesse Works Weight: 400 kg EQUIPMENT FT nesting table with full surface Automatic loading system with side lift table Automatic labelling machine for barcode printing Bodpsydkdgsfx Afnowh Automatic printing and dispensing system for adhesive labels Automatic unloading system with motorized conveyor belt Front safety and protection system with mats and fences Automatic lubrication system Air conditioning for control cabinet Vacuum pump

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 Bedjtzfntjpfx Afnswh No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW Bwedpotqi Uyefx Afneh HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: excellent (used), New 2006 Bwedsrfxr Uepfx Afnjh Brother CNC-B00 Control Pallet Change time 3.4 seconds Pallet Size 600 x 425mm X axis 550mm Y axis 400mm Z axis 415mm Spindle speed 12000rpm 40 Station ATC BT30

Condition: used, machine/vehicle number: 008011, X axis working area: 6200 mm Y axis working area: 1935 mm Bwodpfowu Af Eox Afnoh Working Table: Pod and Rail Main Electrospindle power: 10.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Bwjdpfsd Ixadox Afneh Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. Bwedpfxsd Ev Upe Afnsh DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired Bodpfx Afswg S Tvjnswh C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€) Bwodpfxerthkue Afnoh

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Bodpsxcnzrefx Afnswh Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included.