Round cylindrical bending machine

Scharringhausen UDR X1 3

Condition: good (used), Year of construction: 2014, DMG MORI DMU 50 Technical Features of this 5-axis machining center Manufacturer: DMG Model: DMU-50 Year: 2014 3D CNC Control: HEIDENHAIN ITNC530 SMART NC Screen Type: DMG ERGOLINE® CONTROL 19” NC Swivel Rotary Table Simultaneous: INCLUDED Table Surface: 630×500 mm Max Weight Allowed on Table: 250 kg / pallet Turning Table (C Axis): 0.001º (±360º) Axis: Longitudinal Traverse (X Axis): 500 mm Cross Traverse (Y Axis): 450 mm Vertical Traverse (Z Axis): 400 mm Rapid Feed (X/Y/Z Axis): 42,000 mm/min Working Feed (X/Y/Z Axis): 10,000 mm/min Tilting Range (B Axis): -5º/+110º Spindle: Spindle Speed: 10,000 r.p.m. Taper: SK40-DIN 69871 Main Motor Power: 25 kW Automatic Tool Changer (ATC): ATC Positions: 60 Max Tool Length: 300 mm Equipment: Chip Conveyor: INCLUDED Active Control Cabinet Cooling: INCLUDED Tool Touch Probe: INCLUDED Dsdpfxjy Smynj Ahgsci Direct Measuring System: INCLUDED Flushing Gun: INCLUDED Portable Handwheel: INCLUDED Suction System: INCLUDED Internal Coolant: INCLUDED Coolant Deposit with Paper Filter: INCLUDED Others: Machine Dimensions (L x W x H): 5,100 × 3,200 × 2,750 mm Total Power: 27 kVA Machine Weight: 4,500 kg Price on request

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm Dodpsihf R Usfx Ahgsci HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Condition: new, Model Name Djdpfegvquwex Ahgjci Shark 332-1 CCS

Year of construction: 2019, condition: new,

Condition: excellent (used), Year of construction: 2016, CMZ TA 20 TY-400 2016: YEAR: 2016 CNC: Fanuc 32i Dsdeyzduzopfx Ahgjci MAIN FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 473 mm Chuck: SMW Autoblok BHD 250 Bar capacity: 66 mm X axis travel: 310 mm Z axis travel: 400 mm Y axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm Turret: 12 stations, all driven Max. speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Tailstock travel: 400 mm Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: Chuck SMW Autoblok BHD 250 Tool presetter Servo motor for tailstock Tool holder set including 2 driven holders Chip conveyor MACHINE CONDITION: Machine in very good condition. 100% operational. Can be inspected under power.

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Dcodpfexyh Hvsx Ahgji Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Condition: good (used), Year of construction: 1975, Forming rolls R30/40/50/60/70/80/90/100 Under power good running order Documentation drawings availebel Max. workpiece: 3000Ø Maximum sheet thickness:12mm Max. dishing radius: R-300mm Dodpfxjxcnabs Ahgjci Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 20mm Working speed: 0 - 5000mm/min. Power: 30kW Length: 5000mm Width: 1600mm Height: 2800mm Weight: 6000kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Steam output 800 kg per hour with Weishaupt GmbH burner Burner type WM - L10/3-A Djdpfxev I E Tgj Ahgeci Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024.

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm Dcsdpjt Hwucsfx Ahgji total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Dcodpfx Aerx Rxtshgji X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg