Multi function punch

Schüco 296817

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Laodpfx Aewu Ez Non Uob

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connecting cables Used, untested robot No tech counterpart. Not tested. Ljdegu U Itjpfx An Usab

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Lasdpovl Skgefx An Ueb Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Ledpfjd Swtaex An Ueab throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Lsdpfexqdtasx An Usab Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Condition: used, Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm Ledpfsvpr N Rox An Ueab With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Year of construction: 2003, condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Laodpfjmrri Dox An Usb

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Lodsx I Rqcspfx An Ueab

Year of construction: 2005, condition: excellent (used), pneumatic punching machine Lasdpoff Apwefx An Uob

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Ljdpfeff Apiox An Ujab Stroke 20 mm