Tool turret

SAUTER 0.5.480.525

Condition: used, Tool turret TER Type:0.5.480.525 Fpsdpfx Asvi Hvlsndsi The article is used, comes from an industrial machine dismantling and was in operation until the dismantling. Please note that this is a sample image, which may have different traces of use and/or software. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for descriptive purposes only. Further information can be found on our homepage *

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Fpedoihf R Ujpfx Andsi Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of slots in tool magazine: 16, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Additional equipment • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits • Center distance: approx. 600 mm • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Fpjdpfex D E Hnox Andji Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width Fjdpfekwcdbjx Andepi 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Fedpfx Aexc Hh Djndopi Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Fpedswu Dlaepfx Andji Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. swarf conveyor

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) Fpedpfx Anscc D Ddjdoi machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space required: 600 x 450 x 175 mm Fodpfsb Ez R Uex Andjpi Weight: approx. 100 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Fpedpfxey Sxkfs Andei Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz Fpsdpfxocdrmmj Andoi - total power requirement 3,92 kW without control