Flotation system / automatic coating machine

SARMAX APACHE 3

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Ljdsvviytepfx Ampjaa Storage location: Nattheim

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Lajdpfxjxnnd Do Ampea Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Lsdpfx Aev Si Szempsaa Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Two working fields with dimensions of 620x110cm. Lajdpfxsudy A Ns Ampsa

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Lasdpfx Amju Axfcjpja Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Lajdpfxjv Nhx Us Ampja Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system Ljdjw Av Ivopfx Ampeaa 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: used, mileage: 371,140 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,170 kg, maximum load weight: 15,830 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,600 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Cylinder head gasket defective Lasdpfxswzzkyj Ampja The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine producing 309 kW (420 hp). First registered on 03/12/2012, the vehicle has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With a length of 9,600 mm, a width of 2,550 mm and a height of 4,000 mm, this truck offers a permissible gross vehicle weight of 26,000 kg. The yellow (metallic) vehicle is equipped with a green emissions sticker (class 4) and comes with practical features such as a steering axle, reversing camera, and integrated air conditioning. It offers seating for two persons and has two doors. The truck has previously had one owner and is in used condition. In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of viewing and delivery within Germany. Sale exclusively to traders (agriculture, self-employed professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: new, Cefla painting system Laodpjwhbrwofx Ampea

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Laedpfx Aowgbxzjmpoa