Metal detector

S+S

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ppodpfx Asvvkmbjl Nju

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Ppsdpsrc Dkqjfx Al Neu Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Type: TR 210 Overall dimensions: Width: 950 mm Depth: 950 mm Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm Pedpfoxxk H Aox Al Nepu

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V Ppedpsk Eakvsfx Al Nju -0,7 A -50 Hz -IP 65

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Psdpfx Aleqmi Irj Nspu Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Ppsdpfolatz Dox Al Nsu - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: excellent (used), The PFAFF 122-6B S is a high-quality German sewing machine designed for working with heavier materials. It is equipped with a triple feed system (walking foot), which ensures even material advancement during sewing. This machine is ideal for sewing: Pjdszgm Sdepfx Al Nepu leather, furniture upholstery, technical fabrics, tarpaulins, straps, covers. Technical specifications: Manufacturer: PFAFF Model: 122-6B S Triple feed system Foot pedal control Work table included Bobbin stand Belt drive Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold exactly as depicted in the photographs.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E Ppodpfx Aoyt Iawel Nou stationary with magnet + 2 pairs of new shafts Machine is without gearbox.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Ppsdpfey S Rqwjx Al Nju Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Podjzgc Ubopfx Al Nopu Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: used, Year of construction: 2006, operating hours: 4,450 h, functionality: fully functional, overall weight: 19,000 kg, power: 257.42 kW (349.99 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C9, Field of application: waste wood and fresh wood, household and bulky waste, electronic scrap Shafts with 7/7 discs, 5 knives per disc Breaking bar with comb Robust hooklift frame Axle unit with drawbar Psdjy Akb Rspfx Al Nspu Permanent over-belt magnet Radio remote control

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Ppsdjyl Sy Eepfx Al Nou

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: electric, working width: 2,000 mm, cutting angle (min.): 1 °, stroke rate (min.): 40 1/min, sheet thickness (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, power: 2.2 kW (2.99 HP), overall weight: 500 kg, total length: 2,280 mm, total width: 550 mm, total height: 1,850 mm, warranty duration: 24 months, Equipment: emergency stop, steel thickness for cutting Podpfxoymc Nyj Al Nepu

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Podpfx Alev Nwrwo Nepu

Condition: new, functionality: fully functional, overall weight: 160 kg, Year of construction: 2025, The JCYP3525H is a high-performance, tower-type concrete 3D printer designed for the production of precast elements, architectural components, and construction-related additive manufacturing. Delivered new directly from the manufacturer, this machine offers industrial-grade specifications at a competitive price point, significantly lower than that of European-manufactured equivalents. Key Technical Specifications Build size: 3,500 × 3,500 × 2,500 mm Machine dimensions: 2,700 × 2,500 × 2,700 mm Nozzle diameters: 20 mm / 25 mm (interchangeable, quick-release) Compatible materials: Concrete, geopolymer, cement-based mortars Layer thickness: 3–20 mm (adjustable) Print speed: 0–200 mm/s Extruder screw: 3D curved screw design for consistent material flow Material feeding: Pump-fed system with automatic PID control Drive system: Rack & pinion with servo motors (high repeatability) Extruder: Quick-disassembly design for fast cleaning and maintenance Dust protection: Bellows covers on all linear axes Installation: Easy on-site assembly design Machine Highlights ✔ Servo motor drive system – high positioning accuracy and repeatability ✔ Automatic feeding with PID control – consistent extrusion, no manual intervention Pjdoymc Szspfx Al Njpu ✔ 3D curved screw extruder – superior concrete homogeneity compared to standard auger designs ✔ Quick-disassembly extruder head – downtime under 10 minutes for cleaning ✔ Compatible with standard dry-mix concrete – no proprietary materials required ✔ Dust-proof bellows on all axes – suitable for outdoor and factory environments Suitable Applications Precast concrete element production Architectural facade panels and decorative elements R&D and university / testing laboratory use Geopolymer and sustainable construction material development Small-format wall sections and structural components Commercial Terms Condition: New Availability: In stock / lead time approx. 6–8 weeks Delivery: DAP / CIP Central Europe available CE documentation: Available upon request Training and commissioning support: Available Warranty: 12 months on mechanical and electrical components