Top-mounted dryer

Ryser GmbH BAFAG ATU 15

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 Itsdpfx Asiyyf Ism Ijf 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) Isdpfx Aoh Rdwxem Ietf - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 1992, condition: used, for roasting peanuts, hazelnuts, almonds, pistachios, sunflower seeds, melon seeds, pine nuts, cashews, macadamia. Stored dismantled inlusive catalyst and Afterburner Price and further information on request The machine can also be offered completely overhauled. Itodpspm E R Aefx Am Ief

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill Itedpfx Amjh Di H De Isf -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor, Itsdof Dc D Hjpfx Am Ief

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, Isdpjiyyc Esfx Am Ietf parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: like new (used), functionality: fully functional, 2 x 150 liter dryers with the option to connect an additional 150 liter container. The drying unit is already prepared for this. Itodpjxk Tx Sefx Am Isf

Year of construction: 1988, condition: good (used), Trochner plants Motan Ijdpfogk Nw Esx Am Iotf Type:MD 200 HT Year 1988 200 cm3/h KW 17 Plus 2x reserves about 200 kg Man can also up to 8x complete tank

Condition: good (used), Year of construction: 1991, Singer devices Motan Year from 1991 Available 6x STK Itjdpsidvx Tsfx Am Ief

Condition: like new (used), Year of construction: 2018, clamping force: 2,300 kN, Equipment: documentation/manual, Toshiba EC230SXII – 230 ton Injection unit i8 – Screw 50 mm CLAMPING UNIT Clamping force: 2250 kN (230 t) Tie bar spacing (H×V): 610 × 560 mm Platen size (H×V): 880 × 830 mm Moving platen stroke: 550 mm Max daylight: 1230 mm Mold height min–max: 250–680 mm Ejector force: 49 kN (5.0 t) Ejector stroke: 130 mm INJECTION UNIT – 50 mm Screw diameter: 50 mm Shot volume: 392 cm³ Shot weight PS: 361 g Shot weight PE: 286 g Max injection pressure: 200 MPa Max holding pressure: 200 MPa INJECTION SPEED / RATE STD speed: 250 mm/s STD rate: 490 cm³/s HIGH DUTY speed: 160 mm/s HIGH DUTY rate: 314 cm³/s HIGH SPEED speed: 350 mm/s HIGH SPEED rate: 687 cm³/s PLASTICIZING Plasticizing capacity PS: 160 kg/h Screw speed: 255 rpm Screw torque: 1421 Nm Nozzle contact force: 29.4 kN (3.0 t) Itodpfxeyhpi Ao Am Ief ELECTRICAL Main breaker STD: 125 A Main breaker HIGH DUTY: 125 A Main breaker HIGH SPEED: 175 A Transformer: 75 kVA Heater capacity: 15.2–16 kW DIMENSIONS & WEIGHT Length: 6.4 m Width: 1.7 m Height: 2.0 m Weight: 9.9 t