Automatic Washer

ROMER MAut

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches Bledpfx Abefz I Hxsbor • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm Blodpfecxxrgox Abbor weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. Bledpsfz Nblofx Abbor The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm Bsdpebv S Elefx Abbslr working table size: 200 x 500 mm working area longitudinal: 300 mm working area cross: 160 mm spindle turning speed range: 1900 - 15000 rpm milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm weight: 340 kg

Year of construction: 2005, condition: like new (used), functionality: fully functional, empty load weight: 1,600 kg, maximum load weight: 1,000 kg, inner dimension height: 1,200 mm, inner dimension length: 1,390 mm, inner dimension width: 1,390 mm, nominal power: 64,000 kW (87,015.68 HP), pump capacity: 500 l/min, pump pressure: 450,000 bar, water tank capacity: 800 l, machine/vehicle number: 25191, A machine for industrial cleaning of machinery and parts. It has 3 washing chambers, one main and 2 auxiliary. The technical condition of the equipment is excellent - used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 Bjdpfx Ajrkz Stebbolr List of main parts of the machine: Door to washing chamber (on cylinders). Upper washing nozzle Lower washing nozzle Pressure piping Control cabinet Washing pump Auxiliary pump 1 Auxiliary pump 2 Water heater (for each chamber) Drain valve Water level sensor Basket for washing elements Oil separator Steam vent Water pressure indicators Automatic water filling and chemical dosing system In addition, we offer a reverse osmosis water filter in the set.

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C Bljdpehhm Edefx Abbsr TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Bljdolf Ek Dspfx Abbsr

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Bsdpfog Eglpox Abbslr Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Bledexb Ed Uspfx Abbor Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, table width: 2,400 mm, table length: 3,020 mm, overall weight: 20 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 960 mm, spindle nose: ISO 50, tool length: 350 mm, tool diameter: 127 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Bsdpferl Svrsx Abbolr