Automatic Washer

ROMER MAut

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches Dcodpfxsfz I Hxs Agzed • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Djdpfx Agshv U U Djzecd Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. Dcedpfjfy T Rcox Agzed • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000 Djdpfxsd Ixade Agzocd

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen Dodpfxof A Nq Uo Agzecd -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Condition: new, Year of construction: 2024, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 5 mm, coil weight: 4,000 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, cutting speed: 40,000 mm/min, product height (max.): 3 mm, working width: 600 mm, type of input current: three-phase, total width: 3,500 mm, total length: 12,000 mm, total height: 2,200 mm, Coil Slitting Line Satılık Rulo Sac Dilme Hattı Dcodpfjtpviqox Agzsd 0.5 - 3 mm Thickness x 600 mm Width x 6 Ton Coil Weight Ideal line for production of Galvanized Grounding Strip production. Topraklama şeridi imalatı e dar bant dilimleme işlemleri için ideal bir hat. Please contact for further details. #coil #slitting #coilslitting #slittingline #uncoiler #decoiler #slit #recoiler #tensioner #coilprocessing #earthing #grounding #grounding #GalvanizedGroundingStrip #GroundingStrip #Strip #topraklama #topraklamaseridi

Condition: new, Year of construction: 2025, BODOR laser cutting systems in top quality at top prices. Dcedpfx Agsfbg Hbjzjd -Simple programming- with service and training, assembly and commissioning. -Machines with 3Kw to 30 Kw power Easy to operate and suitable for beginners as well as established companies.

Condition: used, functionality: fully functional, Year of construction: 2006, 1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Dosing: Aggregates: by weighing belt Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Dsdpfswk Hxhox Agzscd Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY PRICE INCLUDE DISMANTLING offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

Condition: new, Year of construction: 2025, functionality: fully functional, The company BUMEX SP. Z O.O. A car wash for preparing elements before powder coating Working dimension: 1500 x 3200 x 2200mm Chemical tanks heated by oil, gas or electricity, Liquid tanks between 1500-2000l 3-stages of work, Dcedpfx Aehfv D Segzod Operating temperature up to 60 degrees Celsius, Fully automatic control Pre-filter to collect impurities Made of AISI 1.4301 acid-resistant sheet metal Our devices are characterized by very high quality of workmanship, safety of use and the selection of cabin parameters to the existing building. We advise on the selection of painting booths, dust removal systems, exhaust systems and industrial heat recovery. CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT Dcsdownidhspfx Agzed VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum