Measuring Machine

PULZER OLM

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer Laodpfstndpzsx An Ueb - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, Year of construction: 2026, Standard Features Torsion-resistant, robust cast iron saw frame Powered chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting Mechanical saw blade tensioning with electrical blade breakage monitoring Slidable quick-action vise Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Large round support table, rotates during miter cuts, miter indicator (scale) on the operator side Direct switching from manual to lowering mode Easily removable chip collection tray Lodefg Eq Repfx An Uoab 500 mm material stop with scale Including saw blade with 4/6 combi toothing. Technical Specifications Motor: Three-phase 400 V, pole-changing, 1.1/1.5 kW Blade dimensions: 2720 x 27 x 0.9 mm Flywheels: 300 mm Ø Cutting speed: 40/80 m/min Vise clamping width: 275 mm Working height: 978 mm Weight: 370 kg Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting area: see data sheet Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: refurbished (used), Year of construction: 2017, Was overhauled in 2017, with documentation. Lodpewqd Adsfx An Uoab

Condition: ready for operation (used), functionality: fully functional, The Multivac R230 thermoforming machine is a packaging system designed to meet industrial requirements for thermoformed packaging, making it particularly suitable for the food and professional sectors. It is capable of producing precise packaging using either semi-rigid or rigid bottom films and flexible top films, ensuring excellent sealing and optimized material usage. Moreover, the machine is equipped with advanced features such as gas flushing or vacuum, which improve the preservation of sensitive products. As a result, it is commonly used for packing meat, cheese, prepared meals, or products that require modified atmosphere packaging. The Multivac R230 is engineered to integrate into production lines, typically with an overall length between 5,800 and 7,800 mm, a width around 1,000–1,100 mm, and a height of approximately 2,050–2,150 mm, depending on the discharge configuration and associated accessories. Despite its industrial size, the machine maintains a compact footprint suitable for existing facilities. Its ability to handle various film formats and molds makes this thermoforming machine versatile for different tray or container sizes. Drive power varies depending on the version and options; several listings indicate installed power ranges from around 8 kW to 14 kW, with a 400 V three-phase power supply (3+N, 50 Hz), ensuring energy efficiency for high-throughput operations. Therefore, the Multivac R230 remains a preferred choice for operators seeking a reliable machine capable of continuous cycles without loss of consistency or precision. Its robust stainless-steel construction and compatibility with labeling or printing systems further support integration into modern packaging lines. Technical specifications: Ledpfx Anex Itage Ujab Dimensions (L x W x H) in mm: (612 , 130 , 213 mm) Packing formats: multiple, depending on tooling Functions: thermoforming, vacuum, gas flushing, sealing Machine length: approx. 6 to 8 m depending on configuration Electrical supply: 400 V – three-phase – 50 Hz Installed power: approx. 5 kW Construction: industrial stainless steel

Year of construction: 2016, condition: ready for operation (used), A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible. Lajdpfox H S N Dsx An Ujb

Year of construction: 2010, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 443, Used in the biomedical sector for thermoforming blister packs. Bottom film reel width: 320 mm, top film reel width: 300 mm, vacuum pump. Laedpfx Anjx H Tcfe Ujb

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Lasdpfoxcx Atjx An Ueb