Welding turn table high adjustable

Protec KT 1200

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg Load Capacity Welding Positioner, CE Certificate Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Turntable diameter: 1200 mm Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg Ijdpfx Adoxq S Nij Neba

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Ibsdpsrq D Niofx Ad Nea Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding turntable, CE certified. New clamping jaws available at extra cost. Minor signs of use. Load capacity horizontal: 1200 kg, tilted: 1200 kg. Very robust construction. Infinitely variable speed control from 0.05 to 0.6 rpm (up to 1.5 rpm possible on request). Turntable diameter: 1200 mm. Height horizontal: 950 mm, tilted to center: 720 mm. Equipped with hand-held remote control and digital display. Dimensions: Length 1.35 m x width 1.2 m. Isdpfoxbhnpex Ad Neba

Condition: as good as new (ex-display), Year of construction: 2025, 1200 kg load capacity, welded rotary table, CE certified Very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter: 1200 mm Tilting angle up to 120° Height in horizontal position: 1.05 m, tilted to center: 880 mm Hand and foot remote control Ibodpfx Ajlamr Ejd Nea Length: 1.35 m x Width: 1.2 m

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Isdpsxqxvvofx Ad Nsba

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity, welding rotary table, CE certified very robust Speed infinitely adjustable from 0.05 to 0.7 RPM; higher speeds available on request Rotary table diameter: 1200 mm Tilting angle up to 120° Height in horizontal position: 950 mm, tilted to the center: 720 mm Hand and foot remote control Length: 1.35 m x Width: 1.2 m Ibedpfx Adod A Etue Nea

Condition: new, Year of construction: 2026, load capacity: 1,200 kg, pivoting range: 120 °, Equipment: foot remote control, 1200 kg load capacity, horizontal welding turntable, CE certified 1200 kg load capacity, tilted very robust Complete set Speed continuously adjustable from 0.05 to 0.7 RPM; higher speed available upon request for an additional charge of €250. Ibodpfx Adsk Adiks Nsa Turntable diameter: 1200 mm Tilt angle up to 120° Height, horizontal: 870 mm; height, tilted to center: 720 mm Hand and foot remote control Length: 1.35 m x Width: 1.2 m

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg Ibsdpfshcnhmjx Ad Nja - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 2022, condition: as good as new (ex-display), Welding turntable, Protec KT 1200 Kg Motor-driven, steplessly adjustable for tilting and rotation speed Motor: 0.75 kW With remote control Foot switch Table diameter: 1200 mm Ibjdpfxscrmyfs Ad Nja Height: 1000 mm Length: 1400 mm Width: 1500 mm Speed: 0.05 to 0.5 rpm

Condition: new, Year of construction: 2025, 1200 kg load capacity welding rotary table, CE certified very robust Isdpfjifk Rqox Ad Nsba Speed continuously adjustable from 0.05 to 0.6 RPM Rotary table diameter 1200 mm Height in horizontal position 950 mm, tilted to center 720 mm with hand-held remote control Length 1.35 m x Width 1.2 m

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust Iodpfx Ajd Anz Rsd Noba