Welding turntable, turntable, hole table

Protec 3-D Lochtisch 2400 x 1200x 200

Condition: reconditioned (used), functionality: fully functional, control type: manual, actuation type: hydraulic, working width: 60 mm, stroke length: 105 mm, throat depth: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, back gauge: 345 mm, overall weight: 2,800 kg, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Distance between uprights: 1020 mm Throat depth: 200 mm Ncsdpfxoxwukce Agwsp

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm Njdpfxjwigavj Agwecp + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units Ncjdpfx Agen E N Ndewep 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Nsdpfog U Utvox Agwscp Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 5 standard slide units 1 narrow slide unit Ncsdpfx Agorwnyvowsp working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Ncodpfx Aorah S Hsgwep Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: Ncodpfxshhc Ixe Agwjp - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Ncodpfxod A Etuo Agwjp

Condition: used, Year of construction: 2023, functionality: fully functional, Due to the conversion of our drying process, we are selling our walking floor dryer. Drying container / dryer in like-new condition due to limited use. 40” Container, Drying container TC40ft WISSMATEC. Both used and new components: - 40ft sea container - Drying floor with slotted bridge plate - Hydraulic walking floor with cylinder and external quick coupling - Discharge via trough screw conveyor 0.75 kW - Rotary valve 0.75 kW. External length ≈ 12,200 mm, width ≈ 2,440 mm, height ≈ 2,655 mm, weight ≈ 6,500 kg. Year built: 11/2023. Nodewzycbjpfx Agwecp

Condition: new, Year of construction: 2026, Robust, high-quality CNC-controlled double standing seam roll forming machine for roof coverings. Nsdpoyf U Npefx Agwscp Maximum sheet width at the infeed side: 850 mm Maximum material thicknesses: Copper / Titanium zinc / Aluminium 0.8 mm / Galvanized steel sheet 0.7 mm Minimum workpiece length (panel length): 400 mm 2 x 7 forming stations Maximum seam height: 26 mm Infinitely adjustable processing speed up to 15 m/min Drive power: 1.5 kW Power supply as per customer specification: 220V or 400V Weight: 500 kg - Transverse and longitudinal cutting device - Manual adjustment of the transverse cutting device - CNC-controlled longitudinal cutting with an accuracy of +/- 1 mm Optionally available with a longitudinal stiffening rib unit (for introducing reinforcing ribs)