Profile rollers

Profielwals rollen Profielwals rollen

Condition: new, table diameter 900 mm table load 1,0 t swivelling range 135 Grad turning speeds 0,12 - 1,2 U/min 820 mm welding current 500 Ampere total power requirement 0,75 + 0,55 kW Podpfofv Axxsx Akisrc weight of the machine ca. 1,1 t dimensions of the machine ca. 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. Pjdpfeglaq Iox Akisrc 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Pedjwuqbbjpfx Akisrc Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: new, 30 / 900 mm 30 / 900 mm L-beam 35X35X5 / 600 mm T - beam - web outwards 50x6 / 600 mm Axis diameter 40 mm work speed 4,5 m/min roll diameter 148 mm total power requirement 1,1 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,75 x 0,6 x 1,4 m Predpfx Aksq Adtqsisc Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 " - Operation manual - Foot switch left / right and EMERGENCY STOP

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) Podpeia Ta Usfx Akiorc - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled Podpfx Aksfg E Hmoisrc • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Psdpfxeh S H Rre Akiorc The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2009, machine/vehicle number: 0102-250002, The Behringer HBP310-523GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry. The HBP310-523GA is sold including roller conveyor in the infeed and outfeed side, feed gripper system and cross feed system in the outfeed area. The machine is in very good condition. Working areas of the HBP310-523GA saw Mitre left 75° round 310 mm, flat W x H = 520 x 310 mm 60° round 310 mm, flat W x H = 450 x 310 mm 45° round 310 mm, flat W x H = 350 x 310 mm 30° round 230 mm, flat W x H = 230 x 310 mm Mitre right 75° round 310 mm, flat W x H = 500 x 310 mm 60° round 310 mm, flat W x H = 420 x 310 mm Prjdpfx Akeyh Ixajioc 45° round 270 mm, flat W x H = 270 x 310 mm Minimum round: 20 mm Maximum material length: 10 m

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning Prodpfofz A Ilsx Akioc The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: ready for operation (used), Hydraulic unit, consisting of an oil tank with a drive motor mounted on top, with a flanged hydraulic pump, and two valve blocks located above it. 1. Valve block, manufacturer: WANDFLUH-Hydraulik Maximum pressure: 160 bar Prsdsdz Dlispfx Akisc Delivery rate: 20 l/min 2. Valve block, manufacturer: BOSCH Operating pressure: 319 bar Drive motor: 220/380 V, 1420 rpm, 2.2 kW Space requirement: 700 x 620 x 1050 mm Weight including hydraulic oil (approx. 90 l): 193 kg