Cutting machine

Posch Linia

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Cgjdpfxencft Us Aansl

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Csdpfx Aohzlr Isanegl ✔ Power: 18,5 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: new, - Engine power 7,5kW - cutting force 20to Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm Csdpfx Ajftnt Neansgl - machine weight approx. 2500kg - tank capacity approx.100Liter - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Cjdpfx Aaewtgcxenegl Fuse protection: 25 A Condition: used

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Cedpfxevviyto Aanegl Storage location: Nattheim

Condition: used, Year of construction: 2001, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 245 mm, working height: 100 mm, type of input current: three-phase, – Year of manufacture: 2001 – Optimization – Cutting to line – The machine has additional tables, allowing a maximum cutting length of up to 6500 mm; currently reduced to 3400 mm – 8 cutting beams TECHNICAL SPECIFICATIONS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s2 – Optimization according to length and value Csdpfowtzrhex Aanjgl – Pneumatic material clamping – Five ejection units – Intelligent, controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Condition: new, Year of construction: 2024, Our electric chain saw with 5kw is ideal for sawing bundles of meter wood in connection with our sawhorse. Cjdpfx Aofnrx Tjanogl By sawing whole bundles of firewood meter wood an enormous amount of manual work is not necessary! In a 1-man operation, up to 1 ster of wood and approx. 5 ster per hour can be processed within a few minutes. The average time per cut is 1.5 minutes.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Cedpfx Aaew Sy T Henjgl

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 10/2026, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved Cedpfxsmnp Afj Aanjgl --- * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale!

Year of construction: 1990, condition: good (used), used brushing machine with wacuum table Csdpfx Aaed Tanysnjgl