Milling motor for edge processing machines

Perske DVMS 603/2

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Bljdeyx Uy Aepfx Aa Ion Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Year of construction: 2018, operating hours: 3,550 h, condition: good (used), fuel type: diesel, Kubota RTVX900 UTV Gator 4X4 Diesel with hydraulic tipper bed, 2018, 3550 hours Video available via WhatsApp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. offers a changing inventory of machines, trucks, trailers and attachments. All our supplies are at trade prices and sold AS-IS without any guarantees. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Bjdpoyt Nr Ujfx Aa Ijln 5391 LR Nuland

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 URACA 3-plunger pump KD606 Flow rate: 138 l/min Blodpfxov Hqpqo Aa Ijn with 30 kW electric motor

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 24, gearing type: automatic, emission class: euro6, color: silver, Year of construction: 2026, Equipment: ABS, electronic stability program (ESP), NEW Mercedes-Benz Sprinter 519 CDI Mercus | 22+1+1 Seats | Euro 6 New Mercedes-Benz Sprinter 519 CDI, professionally converted by Mercus into a high-quality passenger bus. This vehicle is newly built and available for immediate delivery. This Sprinter is ideal for professional passenger transport, such as airport transfers, corporate transport, VIP transport, or tour bus operations. The bus features 22 comfortable passenger seats, plus a driver's seat. The interior boasts a modern and attractive design with high-quality upholstery and stylish wood-look accents, creating a professional finish. Passengers benefit from individual reading lights, personal ventilation, curtains, and luggage racks, enhancing comfort in every situation. Blsdpfxeyn Uvbe Aa Isn Thanks to reliable Mercedes-Benz technology and high-quality equipment, this bus is immediately ready for professional use.

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Bledpfsy D An Sex Aa Ion Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: used, Year of construction: 2001, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Construction year: 2002 year Condition: used Category ID: 2094 Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call. Bledpfxszq Hwhj Aa Ion

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Bedpfx Aajw Ah N Eo Ieln - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 4,800 mm, mast type: triplex, construction height: 2,200 mm, power: 8 kW (10.88 HP), fork length: 1,200 mm, drive type: Lithium-Ionen, Electric 4-wheel forklift Load centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Battery voltage: 80V Bedjy Up Dhepfx Aa Ijln Battery type: Lithium-ion Battery year: 2024 Battery condition: New Description: Battery system: Innovative lithium-ion quick-change system with modular 26kg battery packs. Fast, tool-free battery exchange in just a few minutes. Expandable up to 6 modules for maximum operating time. Ideal for multi-shift operation and use without fixed charging infrastructure. The machine comes with 6 batteries. Sideshifter, 3rd valve, 4th valve, Partial cab, battery exchange system

Condition: used, Year of construction: 2024, Diameter 160mm 1.448m3/h Depression 2.503 Pa 2.2kw motor Bledpfx Aajzmmlkj Isn 2.800 Tr/min Pneumatic deslagging as new 400V