Flatbed

Panhans 335A

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Bsdpfx Ajw Iddzslcjlh Operator shafts number: 6

Condition: used, functionality: fully functional, Klockner chipper 120x400 H-2WT - German production - shafts in very good condition TECHNICAL PARAMETERS: inlet width 400 mm inlet height 120 mm two knives rotor diameter 420 mm power of main motor 30 kW feed motor power 2 x 2,2 kW bottom shaft pulling toothed top pulling toothed shaft sieve fi 20 mm Bedpfx Alothfm Uocolh feeder length 2600 mm transport dimensions (length / width / height) 300 / 245 / 170 cm weight 1500 kg

Condition: excellent (used), Year of construction: 2005, Mawera FSB 700 – Fully automatic biomass boiler with moving grate (wood chips), year of manufacture 2005, for sale. The fuel feed is hydraulic, not by screw conveyor. Components: Boiler body, combustion chamber and heat exchanger, complete hydraulic feed unit, flue gas fan, multi-cyclone, ash separator, chimney piping, control system, electrical control cabinet, operating manual. The system can be inspected in operation on site. Dismantling is possible after the heating season. Bjdeya Ngxepfx Alcolh Condition: Excellent Manufacturer: Mawera Model: FSB 700 Year: 2005 Video available via Whatsapp

Condition: excellent (used), Chipper KLOCKNER HZM 1/400x100 with vibrochute – German production – year of production 1992 – six pulling rollers – autoreverse TECHNICAL PARAMETERS: inlet width 400 mm inlet height 100 mm engine power 30 kW sieve 50 x 60 mm feed motor power 2 x 4 kW vibrochute 4900 mm two knives rotor diameter 400 mm autoreverse three top pulling toothed shafts Blodpfxoiwi H Re Alcsh three lower pulling toothed shafts transport dimensions (length/width/height) 500 / 230 / 150 cm weight 2500 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 3,675 h, overall weight: 880 kg, spindle motor power: 5,500 W, spindle speed (max.): 9,000 rpm, Spindle moulder manufactured in 2013. This PANHANS 245 features a robust table size of 1100 × 760 mm and a spindle height adjustment of 125 mm. It operates at spindle speeds of 3000, 4500, 6000, and 9000 rpm, making it suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the PANHANS 245 spindle moulder we have for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Phases: 3 • Current type: AC • Motor power: 5.5 kW • Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm • Table size: 1100 × 760 mm • Table height: 880 mm • Spindle height adjustment: 125 mm • Spindle diameter: 30 mm • Tilting range: −5° to +45.5° • Extraction connection: 2 × 120 mm Bodpfeywk U Tjx Alcolh • Required space: approx. 5000 × 2800 mm • Noise level (idle): 67.4 dB(A) • Noise level (working): 82.4 dB(A) • Sound power level (idle): 83.0 dB(A) • Sound power level (working): 91.2 dB(A) • Operating hours: 3,675 h

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine Blodpfxev Hm Nms Alcjh MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Blsdsy Rh Nzjpfx Alcoh Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Bljdpfxewvp Dds Alcjh