ORT RP18B rev

ORT RP18B rev

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Laedpfxew N Rh Ao Aa Esk Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm Lsdpfxsv Sva Es Aa Ejak capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg Ledpfx Aasuuz Iis Eoak The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: excellent (used), Control : D.Electron Z 32 Laedpfx Aaed Sitko Eek centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm Lasdpfxjd Hy Ele Aa Eok T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm Lajdpsv Az Ucsfx Aa Eok diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 Laedpfsrxxbtsx Aa Eok height of stroke 3300 mm weight of the machine ca. 9650 t

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Laedpfx Aaerw Dknj Esk Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm Ljdsu Ixwispfx Aa Ejak external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for secondary machining, featuring C axis, Y axis, and driven tools. Installed in 2002 and compliant with CE standards, with the following main specifications: Turning diameter: 755 mm Workable diameter: 390 mm Workable length: 655 mm 12-position driven turret Y axis travel: +/- 60 mm C axis Laodpoxf Iygjfx Aa Esk Spindle nose: A2-8 Kitagawa B-210, 250 mm Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Tailstock: MT5 Rapid traverse speed: 18 and 24 m/min on X and Z axes Weight: 5,800 kg Complete with: - Hydraulic programmable tailstock - Box ways - Chip conveyor - Headstock oil cooling - Dual foot pedal for main chuck and tailstock open/close - Set of fixed tool holders - Set of driven tool holders - Complete manual set - CE certificate