Injection molding machine

Nissei NEX15-1E

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Isdpeu E El Iofx Akpjtn Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Itedpek Rnq Njfx Akpsn Total: 25.4 kW

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt Itedpfx Akewv Hnmspjn SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Year of construction: 2016, condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Ijdpfx Aonbff Askpstn Model: GCVC RD 035.1/12-42-0007305P Year of c.: 2016 2 fans Volume: 4,6 l Comressed air: 32,5 bar

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Iedpfxjxfka No Akpjtn Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Isdpspu R Ncofx Akpstn Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: good (used), Year of construction: 1992, Fanuc Fanuc automatic press AC 100 Closing force: 100 tons Year of manufacture: 1992 Itsdpfx Ajh R Npxskpsn

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Iedpfx Akjfnvvijpetn Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Ijdpfx Akox D Rq Eopetn Application Types Injection Moulding

Year of construction: 2018, condition: new, For sale is a magnetic filter that has only been used once. Isdpedzp R Tofx Akpotn Sealed. Includes 9 magnetic filter rods, with cleaning function.