Used Zerma Granulator for sale (41)

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Hfodpfx Afoghgdvonjc Compact dimensions Knife holders screwed into rotor pockets

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc. Hfodpjghgftsfx Afnjc

Condition: used, machine/vehicle number: 12897, Rotor diameter: 800 mm Rotor width: 1600 mm Rotor blades: 7 Stator blades: 2 Inlet cross-section approx. 800 x 1600 mm Drive motor: 160 kW Hedpfxswbwwvs Afnofc

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA auxiliary mills of the GSL series 180/120 to 180/430 were developed as low-speed mills especially for applications in the injection moulding sector. They have a rotor diameter of 180 mm and working widths of 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be reground several times. The material to be shredded is fed via a noise-reduced feed hopper of sandwich construction, which is available in different versions depending on the type of feed. Depending on the task, the side mills of this series are mounted on a low or high chassis and completed with a corresponding suction/outlet trough. Together with numerous options, the side mills are extremely variable in use. Hfjdpfjghgbdsx Afnjc In addition to the usual advantages of all low-speed mills, such as low noise emission and almost dust-free grinding material, the GSL 180/120 to GSL 180/430 beside-the-machine mills are characterized above all by their knife, rotor, quick-snap system and by their good accessibility.

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Hedpjwikaajfx Afnsfc Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Hodpoghgdgsfx Afnsfc Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Construction and demolition wood Veneers, MDF and chipboard

Condition: used, machine/vehicle number: 12883, Rotor width: 800 mm Hfjdpfowbwqvox Afnec Rotor blades: 5 Stator blades: 4 Inlet cross-section approx. 500 x 800 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Hodpfx Aswbwvlofnsfc Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact cutting mills in the GSC series are completely soundproofed cutting mills and therefore particularly quiet. The integrated soundproofing ensures ideal accessibility to the cutting mill itself and for changing the blades and screens thanks to its well thought-out design. The noise protection is based on the use of the latest soundproofing materials. The housings, manufactured in a stable steel/welded construction, in conjunction with the V-cut rotors (except GSC 300/300), enable a long service life and universal applicability. The tangential housing geometry means that even bulky feed materials are easily accepted and shredded by the rotor. Hodpfxoghgbws Afnsfc All machines in the GSC series always deliver high-quality ground material - regardless of whether the feed material is injection molding or blow molding waste, profiles, plates or films. The types in the GSC series are cost-effective, very reliable, easy to clean and have a long service life. Integrated sound insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimal design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation makes the cutting mills compact and mobile. The machines can be transported to any location using a pallet truck or forklift. ZERMA offers a variety of options such as extraction systems, conveyor belts, metal detectors, fine material separators.

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a supplement to the ZWS series. The series was designed as a cost-effective solution specifically for shredding wood residues in small and medium-sized wood processing companies. AT A GLANCE: Compact design Stable welded steel construction Large-volume hopper for material feeding Rotor made of solid steel with screwed knife holders PLC control for fully automatic operation Technical data SMART 600: Inlet 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 - 120 Hjdpfeghgdcsx Afnjfc 13 rotor knives Technical data SMART 600 S: Inlet 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 - 120 26 rotor knives

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm Hedpjghgdkofx Afnefc   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Technical details: Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Hfjdpfx Asghgd Iofnoc The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are extremely stable machines for the toughest demands and tailored to the versatile requirements of a modern recycling operation. The housings, manufactured in heavy steel/welded construction, withstand even extraordinary loads. Bearing, blade mounting and rotor shaft are far oversized and therefore extremely resilient. By simple retooling, massive lumps and thick-walled pipes as well as hollow bodies and foils can be shredded effortlessly. Depending on the individual task (and also for temperature-sensitive materials), different rotor variants are available, but they all have one thing in common: the modern and superior V-cut technology. All machines of the GSH series always deliver a high-quality regrind - whether from bottle crates, profiles, sheets, foils, or start-up lumps and tubes. They are economical, very reliable, easy to clean, and have a long service life. In combination with the extensive range of ZERMA options, accessories (such as extraction systems, conveyor belts, metal detectors, fines separators, roller feed systems, etc.) as well as spare parts, an individually optimized size reduction system is created. The advantages are shown in a considerably reduced effort in terms of costs, time and personnel. Sophisticated housing design The housing is divided diagonally in the middle and the upper part with feed hopper can be opened hydraulically so that the rotor is completely exposed for knife changes and cleaning. The sieve insert is also held by a hydraulically swiveling sieve basket, and accessibility is thus optimal for removal and installation of the sieve. Reversible sieve insert. Robust external bearing Another well thought-out design feature is the bearing arrangement outside the machine. Robust roller bearings in steel bearing housings guarantee a long service life and are ideal for the toughest conditions. The external bearing prevents grease from entering the grinding chamber, and vice versa, grinding material or fines from entering the bearing. This is another significant advantage, especially when the machine is operated in wet conditions. Flywheel In order to compensate for shock loads during comminution, a flywheel is available as an option. For attachment, the rotors have a second shaft end as standard. Hodpfxeghgflo Afnofc High operational reliability All granulators comply with EC machinery directives and are CE marked. Accident safety is ensured, for example, by overrun protection devices with limit switches and hydraulically unlockable check valves.

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 7185, Zerma single-shaft shredder with hopper cover Hedpfx Aexzrzmjfnofc

Year of construction: 2023, condition: new, functionality: fully functional, Zerma cutting mill type GSL 180/300 IE motor 4.0 KW, 400V, 50 Hz Rotor diameter: 180mm, rotor width: 300mm Rotor knives: 30 pieces, stationary knives: 2 pieces Hodpfor E Aqvox Afnefc low version, on wheels Standard - hopper Screen insert: Ø >5mm round

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 5,000 h, machine/vehicle number: ZXS20001004001, For Sale: ZERMA ZXS 2000T Heavy-Duty Shredder used for tires. In a very good shape. Max. 5000 working hours. Hfjdpfswri U Usx Afnec Industrial-grade single-shaft shredder designed for heavy-duty size reduction of tires and plastics such as PE, PP, and PVC. Built with a massive 1900 mm wide rotor (750 mm diameter) featuring 96 rotor knives and 25 stator knives, driven by two powerful 132 kW motors plus an 11 kW hydraulic unit. ✅ Large feed opening: 2020 x 2540 mm ✅ Hydraulic pusher system for controlled material feed ✅ Replaceable screen system for flexible output sizing ✅ Rotor water cooling option for demanding applications ✅ Robust steel frame – approx. machine weight 18,000 kg ✅ Noise level approx. 95 dB(A) (without soundproofing) ✅ Advanced control panel with automatic load management ✅ Safety features: emergency stop system, interlocked access panels, and more Ideal for recycling plants, tires and plastics processing, and high-volume material reduction. Supplied with full technical documentation and user manual.