Used Worm Gear for sale (6,748)

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm gear width: * mm Lhedpfx Asyk Ur Usalod max. module: 4 total power requirement: 14 kW weight of the machine ca.: 8 t slide travel axial ( Z-axis ): 300 mm work piece - max.: 490-640 mm

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Lhjdpfx Aoyv Iplealod Bevel gear analysis ROTEC T50 GA2 Color unit company Binks

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 8 (10) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm Lhsdeyv Ipfspfx Aaljd tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Ledpfx Aof Axn Usaljhd Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Ledpofxg T Ujfx Aaljhd Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition Ljdpfx Aedzp U Ajaljhd

Condition: good (used), Servo motor, electric motor, DC motor, servo geared motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 44X25SI -Voltage: 24 V -Speed: 2860 rpm -Gearbox: PLG 52 i = 8:1 -Shaft: Ø 12 x 22 mm Ljdpfxop Hiywo Aalehd -Number: 7x geared motors available -Price: per piece -Dimensions: 172/58/H52 mm -Weight: 1.1 kg/pc.

Condition: new, For sale: professional gear motor from the renowned German company SEW EURODRIVE. The units come from warehouse stock – brand new, unused (warehouse surplus). They may show minor storage marks visible in the photos. Robust industrial construction designed for continuous operation in demanding applications. Ledpeyviw Rsfx Aalehd Gear motors are equipped with a helical gear and an electromagnetic brake (BMG), making them ideal for applications requiring precise stopping. Technical data: Manufacturer: SEW EURODRIVE Model: RF77 DT80N4/BMG/HF/ES1S Power: 0.75 kW Supply: 3~ 380–415 V (50 Hz) / 415–460 V (60 Hz) Speed: approx. 1368 / 1680 rpm Protection class: IP55 Brake: YES (BMG) Brake torque: 10 Nm Mounting: IM M4 Weight: approx. 58.9 kg Country of manufacture: Germany Condition: New – warehouse stock Never used Possible minor storage marks Fully operational Additional information: Price per unit

Condition: good (used), Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer: MOTOVARIO TKFL/10 gearbox -Manufacturer: ASEA MT80B19F100-4 engine -Motor power: 0.75 kW -Speed range: 190-1000 rpm -Motor: adjustable Lhedjchfb Rjpfx Aaled -Drive shaft: Ø 24 mm -Design: B5 -Quantity: 1 motor available -Price: per piece -Dimensions: 445/255/240 mm -Weight: 29 kg

Year of construction: 2020, condition: good (used), Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm Lodeyilg Rjpfx Aalshd -Weight: 5.2 kg

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools Lodpfx Aaoyh Rmtelshd -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor Lhodpfxoyh Rmme Aaljd -Technical documentation

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, Lhjdpfx Aaeyvvlbjled TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: good (used), Year of construction: 2021, DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm Lhodpjyh Uhuefx Aaled -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 20 x 25 mm -Dimensions: 275/140/H175 mm -Weight: 7.2 kg

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m Lodpfx Ajwdyx Uealshd For technical data, see PDF-File enclosed *

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 140S-MC1-10 -1K1-2K i= 10 -Shaft: Ø 40 x 80 mm Ledpoxr A Niofx Aalshd -Number: 2x geared motors available -Price: per piece -Dimensions: 490/190/H260 mm -Weight: 41.2 kg/pc.

Condition: good (used), Year of construction: 2021, Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Nord, Gearbox type SK 1SI40F Ljdpfx Aaoyh E E Rjljhd -Translation: i = 15.00 -Hollow shaft: Ø 18 x 83 mm -M2 max: 49 Nm -Dimensions: 150/120/H150 mm -Weight: 2.7 kg

Condition: good (used), Year of construction: 2021, DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm Lodpfx Aajyh Ai Tolohd -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 25 x 50 mm -Dimensions: 275/200/H170 mm -Weight: 7.5 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 25,769 h, machine/vehicle number: 159687, laser power: 2,500 W, travel distance X-axis: 3,335 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 420 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 3335 mm Travel Y-axis: 1545 mm Travel Z-axis: 420 mm A-axis: ±360 ° B-axis: ±135 ° Maximum workpiece dimensions: 3050 x 1525 x 22 mm Maximum table load: 810 kgf MACHINE DETAILS Laser power: 2500 W Laser model: YB-L250A8M Ledpfjymfmbox Aalohd NC control: Mazak & Fanuc L-64 Dimensions & Weight Machine dimensions: 7,525 x 2,875 x 2,300 mm Chiller dimensions: 920 x 1,600 x 1,780 mm Extraction unit dimensions: 850 x 850 x 930 mm Machine weight: 14.6 t Operating hours: 25,769 h EQUIPMENT Chiller Extraction unit

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, WMW MODUL ZFWZ 500 x 5 (3rd machine) Year of manufacture: 1950 Control: conventional Country of origin: Germany Detailed information / Description Details: Max. gear diameter: 500 mm Gear width: 250 mm Max. module: 5 Total power requirement: 2.2 kW Machine weight approx.: 1920 kg Space requirements approx.: 2500 x 1600 x 1900 mm Lodsytipmjpfx Aalehd Max. cutter diameter: 250 - 285 mm Clamping table diameter: 460 mm Table bore: 70 mm Accessories: various Control: conventional

Condition: excellent (used), functionality: fully functional, Gear hobbing machine ZFWZ 800x10/1 Year of manufacture: 1983 The machine is dismantled and in good condition. Specification: Max. workpiece diameter: 800 mm Max. gear width: 410 mm Max. module: 10 Max. hob diameter: 195 mm Table diameter: 700 mm Table speed range: 40-280 rpm Power capacity: 12.5 kW Lhjdpfxeytimlo Aalsd Voltage/Frequency: 220/50 V/Hz Axial feed: 0.2-8 mm/min Radial feed: 0.1-2 mm/min Tangential feed: 0.1-2 mm/min Weight: 9 tons

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm tangential adjustment 110 mm ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Ljdpfx Asx N Ndkoalshd Worm wheels for single or multi-start worms, Worms, sprockets, ratchet wheels, splines

Condition: excellent (used), max. wheel diameter 130 mm Lodpox N Nddjfx Aalohd gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: excellent (used), Maximum wheel diameter: Min. module: 1 Max. module: 6 Table diameter: Maximum wheel diameter: Ledpfx Aaoyr Tatelehd -with counter support: -without counter support:

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm Ljdpfx Aoqvcnnjalohd CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *