Gear motor 0.12 kW 41 rpm

VEM 1351-3/1

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch Kodpfx Asr Eznijldonb • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: used, Gearbox, bevel gear, worm gear -Gearbox: Worm gear ratio: i = 7.5 -Shafts: Ø 14 x 34 mm / see photos -Dimensions: 122/105/H140 mm -Weight: 4.2 kg Ksdpfx Ast Snw Seldjnb

Condition: used, Year of construction: 1975, Accessories/Spare parts for a lathe Manufacturer: TADU, Origin: Spain Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mount: A 1-8", Spindle bore: 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin: Germany Model: MAS 3 An additional reduction gear is installed in the TADU F 650. This allows for a speed range of 8 - 42 and 40 - 200 RPM. Drive motor power: 5.5 kW Price: €4,650.00 Knodpfx Asctgb Tjldeb Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), incl. rollable table 380 VAC Drilling capacity in steel: max. approx. Ø 18 mm Spindle speed 1-stage: 240 / 420 / 675 / 1100 / 1900 rpm Spindle speed 2-stage: 480 / 840 / 1350 / 2200 / 3800 rpm Projection: 215 mm Tool holder: MK 2 Knsdoryn Sbspfx Aldsb Quill stroke: 90 mm Table clamping surface: 220 x 285 mm Cross table travel X / Y: 160 x 180 mm Power requirement: 0.72 kW Weight: approx. 85 kg Dimensions W x D x H: approx. 800 x 900 x 1740 mm

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Knoderhmnwspfx Aldjb -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm -Weight: 0.4kg/set

Condition: used, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear Ksdpfsrqipgsx Aldonb -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece

Condition: used, Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 16 mm Knedpfjgkw R Ajx Aldsb -Takes: square 12 x 12 mm/M10 x 1,5 -Dimensions: Ø 14 x 2405 mm -Weight: 2,7 kg

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller Knodpon Nzibjfx Aldeb -Manufacturer: Nord, NORDAC frequency converter -Type: SK 1300/3 -Power: 1.3 kVA -Input: 3ph 380/415 V 50/60 Hz -Output: 3ph V 2-120 Hz -Number: 1x inverter available -Price: per piece -Dimensions: 205/205/H190 mm -Weight: 6.5 kg/piece

Condition: excellent (used), Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing Knedpfxsh Ra Hgs Aldeb -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Knodpfodki N Sox Aldsb -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg