Used Woodworking Machinery for sale (73,188)

Condition: used, Year of construction: 1987, operating hours: 30,463 h, functionality: fully functional, track width: 1,900 mm, number of previous owners: 1, Equipment: cabin, crane, low noise, RSTW, year of manufacture 1987 / Crane ASX II, 1998 Track width: 1.9 m Cabin on the right side Crane positioned in front of the cabin Four-wheel drive Equipped with a timber bunk Equipped with a trailer Dedpfx Ajzv N Dbob Aekw Equipped with rails and concrete slabs

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Concrete weights will be removed. Dkodpfx Abjzwd Dxe Aew

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Dkedjzul Sfepfx Ab Ajw

Condition: new, Year of construction: 2026, functionality: fully functional, Baljer & Zembrod Diameter Reduction Units • Used to reduce the diameter of logs over their entire length to a specified diameter (e.g., 60 cm). • Cutter lengths: 420 mm to 1500 mm • Log lengths up to 7 meters Dkjdpfx Aez R Iy Njb Aew • Log centering on the log’s center for maximum yield • Clamping device for the end faces of the log, with a rotary table; clamping frame is hydraulically adjustable.

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at ...). Used EBERT forestry semi-trailer, low-bed type Tvp: TLS 36 ST with VIN: W0985180080D17001. Self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS. First registration: 03/2008, Permissible total weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg. The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5, low-profile tubeless. Tire tread: 1st axle 9-12mm, 2nd axle 7-11mm. Axles: 2 x 10 tons. Axles with S-cam brakes and ABS, hydraulic dual-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drawbar eye. 24V electric generator with HD piston pump, oil tank, and 2 batteries allow remote-controlled functions with wireless operation. Brakes: Two-line brake system according to EC, with spring-loaded brake cylinders acting on the rear axles. With ABS. Lighting according to StVZO. Integrated into a recessed under-run protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth. The hydraulic forced steering is equipped as standard with a wireless remote control, so the driver can "steer" from the cab during tight hairpin turns and when maneuvering. Options included in the price: a. Yellow rotating beacon, rear, pluggable b. with 4 pull-out marker panels (red/white) with an extended width of 2,550 mm when retracted and 2,750 mm or 3,000 mm when extended. c. with electro-hydraulically operated access ramps. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further Information = Year of construction: 2008 Unladen weight: 9,000 kg Dksdpfxoz Engko Ab Aow Payload: 27,000 kg GVWR: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: Dodjz Ea E Sopfx Ab Aokw • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Dksdpfx Ajz Ea Itjb Ajw Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. Dsdpez Ea I Tjfx Ab Askw _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ Dsdsztqlzepfx Ab Ajkw WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures Dkedpfxoztqrne Ab Asw • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, New Ceylon semi-trailer, ready for registration. Features include: 3 axles, with the first axle liftable and the third axle steering; EBS; double-sided electro-hydraulic ramps; extendable sides; winch preparation; low-level height of 87 cm; length of 9.95 m; overall length of 13.65 m; and Rud couplings. Immediate delivery, subject to availability. Guaranteed. CONCESSIONARIO INTERDRIVE SRL - PARMA. Djdeh S Aw Repfx Ab Aokw

Condition: used, Trailers, construction equipment trailers -Handover: in its current condition as inspected -Note: Vehicle registration document missing, electrical wiring missing/damaged -Trailer: Construction machinery trailer Dodpfen Uy Awsx Ab Aekw -Loading area: 2220/1085/H420 mm, rim height 410 mm -Overflow device: Tap type ABV25. 1DZKE 2010 to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm -Empty weight: 650 kg

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ Dodpfox Hh A Hsx Ab Askw SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: good (used), Year of construction: 2006, Main Features & Equipment • Unwinder with Web Guide Ensures precise alignment of the web material right from the beginning of the process. • Infeed Nip Unit Provides stable and controlled web tension. • Feeder System Ensures smooth, continuous transport and feeding for uninterrupted production. • Lamination Tower Enables film lamination for surface protection or special finishing effects. • Flatbed Die-Cutting Unit Suitable for high-precision die-cutting applications. • Rotary Die-Cutting Unit Comes equipped with: o Re-register system (ideal for pre-printed webs) o Die load cells for optimized pressure control and enhanced cutting quality • Matrix Stripping Tower Facilitates efficient waste removal for continuous operation. • Outfeed Nip Roller Stabilizes web tension before rewinding. • Rewinder Dkodpfx Aox Hh Euob Aow Produces finished rolls for shipping or further processing.

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Technical Data Maximum web width: 254 mm Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Dedpfxsyt H R Is Ab Aokw Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection - Production of finished label rolls for customers - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder Dkjdpfjynkwnjx Ab Ajw _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Condition: good (used), Year of construction: 2006, web width: 330 mm Corona 8-color UV Cold Dksdpfx Abexzr Dzj Aow In Production etc.

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change) Dedpfsxzr Hpex Ab Ajkw

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Crane position: Rear of cab Dodpfxjyz Twre Ab Aokw Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 11,200 kg, maximum load weight: 25,600 kg, overall weight: 36,800 kg, axle configuration: 2 axles, first registration: 09/2007, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 500 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 245.70 R 17.5, color: light grey, trailer brake: trailer braked, Year of construction: 2007, Equipment: ABS, Used Bertoja extendable low-bed semitrailer, year 2007, 2 axles with hydraulic steering, extendable cradle/bed with 4.0 m central beam, closed cradle length 6.20 m, ground clearance 50 cm, adjustable and detachable gooseneck, side deck wideners – ideal for combine harvesters, air suspension, ABS, ride height adjustment valve, inspected until 31.10.2026 – DEALER INTERDRIVE SRL – PARMA Dodpjy A Ih Iofx Ab Aokw

Condition: like new (used), Year of construction: 2021, GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area The GENERAC WASH RACK MODULE D 6000 x 5700 cm wash area is a customizable washing system, adaptable to various customer-specific configurations, including platform arrangement, maximum load capacity, wall and tank layout, as well as filter system positioning. This modular system comprises side walls (adjustable in number and length, height: 2.6 m) and ramps (number and placement selectable according to requirements) to ensure flexibility. The platform, made up of four units with removable grates for easy cleaning, provides a maximum load capacity of 15 tons. The main filtration system, with a capacity of 600 or 3000 liters, efficiently filters oil, hydrocarbons, and solids. Side tanks on each side and an optional Wash Rack Decanter (1000 liter volume, 1500 x 1500 x 2300 mm, dry weight: 400 kg) separate water from most of the sludge by settling; dosing pumps for flocculants are available upon request. The diaphragm pump (0.054 kW, 14 L/min) is activated by a water level sensor, while the booster pump (0.37 kW, 5–40 L/min) ensures flexible water flow. With a total wash bay size of 8200 x 6600 x 2850 mm, a platform of 6000 x 5700 mm (dry weight: 5600 kg), and a filter tank (600 L: 3000 x 700 x 1000 mm, 250 kg; 3000 L: 3450 x 1000 x 2120 mm, 625 kg), this wash station is ideal for demanding cleaning tasks. Manufactured by GENERAC, this system offers high quality and flexibility for industrial applications. - Customizable side walls (height: 2.6 m) and ramps according to requirements - Platform with 4 units and removable grates, load capacity: 15 tons - Main filtration system: 600 or 3000 liters for oil, hydrocarbons, solids - Side tanks: each side for flexible configuration - Diaphragm pump: 0.054 kW, 14 L/min, with water level sensor - Booster pump: 0.37 kW, 5–40 L/min - Total wash bay: 8200 x 6600 x 2850 mm, platform: 6000 x 5700 mm - Platform dry weight: 5600 kg - Filter tank (600 L): 3000 x 700 x 1000 mm, 250 kg - Filter tank (3000 L): 3450 x 1000 x 2120 mm, 625 kg - Optional: Wash Rack Decanter (1000 L, 1500 x 1500 x 2300 mm, 400 kg) - Product video available: GENERAC WASH RACK MODULE D on the GENERAC website - Areas of application: industrial cleaning, adaptable wash systems - Origin: Manufactured by GENERAC, leading manufacturer from Italy - Modular, robust, designed for custom cleaning requirements Technical Data GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area Specification Value Diaphragm pump power 0.054 kW Diaphragm pump flow 14 L/min Booster pump power 0.37 kW Booster pump flow 5–40 L/min Dedpfx Aeydf Erob Askw Wash bay dimensions (total) 8200 x 6600 x 2850 mm Wash bay dimensions (platform) 6000 x 5700 mm Wash bay dry weight 5600 kg Filter tank dimensions (600 L) 3000 x 700 x 1000 mm Filter tank dimensions (3000 L) 3450 x 1000 x 2120 mm Filter tank dry weight (600 L) 250 kg Filter tank dry weight (3000 L) 625 kg Decanter dimensions (optional) 1500 x 1500 x 2300 mm Decanter dry weight (optional) 400 kg Decanter capacity (optional) 1000 L Max. load capacity 15 tons Year of manufacture 2021 but new/unused

Condition: used, Axle: + Carraro + Type 26.16 Dkjdpfeyx Hgnex Ab Aow Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Year of construction: 2018, KONICA MINOLTA ACCURIOLABEL 190 Year of Manufacture: 2018 _____ Machine Specifications and Equipment:  Total Print Count: ONLY 0.4 million  Web width: 330 mm  Print Speed: Up to 60 ppm Dksdpfx Abeyz Ac Dj Ajw  Resolution: 1200 x 1200 dpi  Paper Formats: A6 - SRA3, custom sizes  Duplex Printing: Yes  Connectivity: USB, Ethernet  Toner System: Simitri HD polymerized toner  All spare parts replaced by KONICA MINOLTA GERMANY – like new.

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: Dkedpfjycv Dvsx Ab Aew 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Year of construction: 2015, condition: good (used), Machine type: P 440 D Dsdpfx Aoycv Eaeb Ajkw Serial number: P122 0315 Year of manufacture: 2015 Maximum working width / format: – 17 inch (approx. 432 mm) Certification: – CE compliant Machine configuration: – Feeder / infeed unit – Two gluing stations, suitable for window and corner window patching – Web guiding system with register and deflection units – Operator control panel – Delivery unit (stacking or winding configuration) Condition The machine is in very good technical condition. It was originally purchased as a backup unit and shows only minimal operating hours.