Used Woodworking Machinery for sale (84,480)

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, controller manufacturer: Syntec, table load: 1,500 kg, rotational speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 380 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, CNC Composite router Gujdpfov Tbggox Aaceh

Condition: used, Year of construction: 1998, Folder Gluer ACE MACHINERY Model SIGNATURE 110N 46CS Manufacture date: 1998 Gedpfxexcv Aqo Aacjuh - Max Carton Width: 1.100 mm - HHS Gluing device type KFE-KPE9, cold glue The machine was mainly used for gluing shoe boxes and was modified/adapted for this purpose to perform longitudinal seams and double longitudinal seams.

Condition: new, Year of construction: 2025, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min Godpfxop R Iwho Aacjuh This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Heigh - 30 – 300mm Notes: Gsdpfxsw E Ey Ts Aacouh This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Year of construction: 2024, condition: new, functionality: fully functional, Since 1997, Copier Machinery has been dedicated to providing the best solution for metal pipe fabrication, accompanied by fast worldwide service and support. We offer a wide portfolio of pipe preparation machinery for cutting, beveling, end working, welding, and roll grooving, focusing on innovation, stability, reliability, and premium quality. Beaver 3 S Manual - Stationary Pipe Beveling Machine ----- Machining range: Pipes and tubes with outside diameter between 0.25" - 3" (12mm - 90mm). Maximum wall thickness in one pass: 12mm ----- Copier’s state-of-the-art stationary beveling machines are user-friendly, equipped with a pipe stop and feed stop to ensure perfect set-up. Nearly every weld type can be achieved with more than 350 machine tooling options. The robust and durable design guarantees a minimum product lifespan of 25 years with low maintenance requirements. Godpfx Ajw U Ek Ajacjuh

Condition: good (used), grinding width: 600 mm, The machine is in good condition. The magnetic plate is 800/500 mm and 1300x700 mm. Price per unit. Guedst Ay Nhepfx Aacoh

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, workpiece height (max.): 130 mm, workpiece weight (max.): 1,000 kg, total height: 2,400 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 12,000 W, power: 24.6 kW (33.45 HP), saw blade diameter: 305 mm, input current: 32 A, air pressure: 7 bar, air demand: 3,000 m³/h, drill spindle length: 130 mm, power of the milling unit: 12,000 W, space requirement height: 2,400 mm, space requirement length: 5,780 mm, space requirement width: 3,100 mm, CNC NESTING FREESMACHINE MET ZAAG 0-360º CNC Bewerkingscentrum Bouwjaar 2025 Hiteco CNC 12Kw freesmotor opname HSK63F gereedschap wisselmagazijn 10 Posities multi-dril 7x verticale boren 8x horizontale boren 1 groefzaag X-as 1 groefzaag Y-as software PWood Pegasus Wekrveld X-As 3.200mm Werkveld Y-as 1.600mm Werkveld Z-as 200mm Vacuümpomp Becker VTLF2.250 5.5Kw Iiebmgku Sotty Ahs Hog Omron veiligheid licht-straat centrale automatische vet-smering aansluit diameter afzuiging Ø200 Benodigde capaciteit 28m/m | 2900m3/h Gewicht 3.200Kg Gratis 1 jaar online help desk. Teamviewer voertaal Engels Gusdpjv Ra Nuofx Aacoh Deze service voorkomt overbodige stilstand. Levering en installatie in Europa

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph Gusdpfx Aaowtqrweceh

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The induction sealer is used for sealing PET and PP bottles with an aluminum protective lid. It is particularly recommended for the chemical, pharmaceutical, and cosmetics industries, as well as wherever it is necessary to secure volatile or corrosive substances from uncontrolled leakage. Main features: • Suitable for use with plastic or glass containers. • Very easy to operate • Handheld device for small production runs • Portable and does not require a dedicated workspace • Packaging speed: approx. 20-40 pcs/min (depending on the operator and product being sealed) • Maximum container diameter: 60-130 mm • Maximum distance between the inductor and container: 3 mm • Activated by a switch located on top of the inductor Control panel: • On/Off switch • Fuse • Digital display indicating current • Digital display indicating time Guodpsxlm Shefx Aacoh • Overheat protection – the device automatically shuts down until it cools down

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Gsdpfx Aot Eatxoaceuh Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Gusdpfx Aaowiq Iwoceh Sheet ejection to the front for small parts Operating manual in English

Condition: new, functionality: fully functional, Year of construction: 2023, 2 BBL brewing system - complete 2 wessel microbrewery 2 vessel microbrewery complete, 300 l Guedswf N Nlspfx Aacsh

Condition: new, Year of construction: 2025, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Gsdpjf Hkgpsfx Aacouh Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: like new (used), Year of construction: 2021, operating hours: 8 h, functionality: fully functional, type of input current: three-phase, 2011 Rigao Machinery Corp Plastic/PE/Laminated Tube Labeller and Tube Filler & Sealer with Cooler This machine is in "as new " condition only running a few thousand tubes for commissioning. It was purchased for a specific purpose, which did not materialise. The system can be run separately (labeller and Filler/Sealer) or as one continuous line. Comes with original tool kit, spares and the option of a 12 month warranty through a UK Based Rigao Specialist. This same company could potentially commision the machine if required (price on application). Plastic/PE/Laminated Tube Filler and Sealer with Cooler ○ The machine is used to fill and seal plastic tube, capable of tube loading, tube code registering, filling, hot air sealing, code printing, trimming and feeding off line a finished tube. ○ Machine contacting parts are made of 316L stainless steel which is clean and sanitary. ○ With a built in safety device, the machine will be shut down if the door is open. There is also an overload protection provided. Parameter Filling volume 5-250ml（by changing different filling system） Filling accuracy ≤±1% Capacity 1800-2400pcs/hour (Depend on tube size and product viscosity） Tube diameter ф13-50mm (by changing tube tooling – 35, 40 & 50mm tooling available). Tube length 210mm (Max. Length) Hopper volume 40 L Power 380V /50Hz 3Phase Gujdpfx Aast Ami Uecsh Air pressure 0.5-0.7MPa Equipped motor 1.1 Kw Plastic/PE/Laminated Tube Labeller with Auto Feeder Tube size： Φ20-50mm，Length: 20-240mm Mandrel sizes: Φ35mm, Φ50mm Labelling speed： 60-100 tubes/minute（vary with tube and label size） Labelling accuracy： ±0.5mm（excluding tube or label difference） Label size： ID: Φ75mm; OD: Φ300mm; Width: 170mm Compressed air： 0.4-0.7Mpa，3L/min. Power supply： 220VAC±5% 50/60Hz 1.2Kw Machine dimension： (L)2,252×(W)1,350×(H)1,875 Configuration list: S6120 servo label out Japan Yaskawa Label detecting eye Japan Keyence Tube detecting eye Japan Keyence Label roller motor transmission Japan Panasonic Stuck tube clearing device Japan Panasonic High precision CAM divider Taiwan RU80DF Pressure roller wheel device Japan Panasonic PLC control system Germany Siemens Touch screen Taiwan Weinview

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Syntec, total height: 2,100 mm, total length: 4,300 mm, total width: 2,100 mm, table load: 2,500 kg, spindle motor power: 12,000 W, number of spindles: 16, Made in The Netherlands | CE certified | Handling; Dutch, English, Turkish, Italian, Polish, and more Manufacturer: D.M.A. Machinery Model: Express-Line type Nesting Dimensions: 1,600 x 3,200 mm Z-axis: 210mm Machine type: CNC Nesting Machine Year of construction: 2024 Features: - Tool-changing station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CADCAM software: Pegasus for milling & paneling - Optional double groove saw (X-Y axis) Godpfxetph I Ne Aacouh - 9.5 kW ATC spindle - 12 kW ATC Hiteco spindle HSK (optional) - 12.5 kW HITECO HSK spindle - Tool holders: ISO30 | HSK63F (ER32/ER40) - Optional: HSK63F (SCM Hiteco) - Speed: 1,000 - 24,000 RPM - Vacuum pump: 5.5 kW – 250 m³/h - Automatic lubrication system: Standard (grease) - CADCAM software post-processor included - Supported file formats: DXF, JPG, PNG, EPS, PLT, and more - Simulation and nesting optimization software

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Gujdpfx Aspu A D Asacjh Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Gjdpfodz Tcbsx Aaceuh

Condition: used, Year of construction: 1981, National 2-3 Hot Former Gedpfx Aaswl Iw Uoceuh induction heater, feeder, straightener

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Gujdpfx Aoiv R Hhjaceh Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Guedpfswl H Nijx Aacjh Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, Model: Express-Router type CNC Nesting Gantry construction, high precision via gantry drive, accurate, requires low maintenance. The gantry's linear guides, driven on both sides, meet the highest standards for precision and dynamics. Rack and pinion drives on the X and Y axes ensure high-precision movement. Fast acceleration/deceleration, rapid tool changes. Dimensions: 2,100 x 3,200 mm (Other sizes: 1,300 x 2,600 – 2,100 x 3,200 – 2,100 x 6,100 etc.) Z Axis: 210 mm (higher options available) Machine type: CNC Nesting Machine Year of manufacture: 2025 NEW – Dutch Assembled – Features: - Tool changer station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CAD/CAM software: Pegasus milling & panel processing - Dual groove cutter (X-Y axis) optional - 9 kW ATC spindle ISO30 - 12 kW ATC Hiteco spindle HSK-63F optional - Tool holders: ISO30 | HSK63F (ER32/ER40) - Speed: 1,000–24,000 RPM - Vacuum pump: Becker 5.5 kW – 250 m³/h - Automatic lubrication system as standard (grease) - CAD/CAM software post-processor included - DXF, JPG, PNG, EPS, PLT, and more - Simulation - Nesting optimization software Pegasus Guedpfswl H Ilsx Aacoh

Year of construction: 2024, condition: like new (used), functionality: fully functional, For sale is a washing and sorting line for pumpkins from the manufacturer Burg Machinery with a capacity of 3-4 tons/hour. Includes dipping tank, polishing unit, roller dryer, and sorting. Gujdew Trldjpfx Aacoh

Condition: used, Year of construction: 2009, DY Slotter Model FPS Gold 1227 Gedpfxsw Rbbvo Aaceuh Year of manufacture: 2009 3-color printing unit (1 defective) Double slotter unit Rotary die cutter Stacker Automatic jogger Automatic prefeeder (defective) Dimensions: Min. 300x500 mm / Max. 1450x2800 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, screw diameter: 90 mm, overall weight: 11,000 kg, total width: 3,200 mm, total length: 5,200 mm, total height: 2,200 mm, HDPE, PE extrusion blow molding machine (canisters, bottles). 4 units for sale. Compressors, chiller, and grinders are included with the machines. Gujdpsxhg N Esfx Aacsh

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Godpfx Aaoq E Ti Hscjuh