Used Wire Straightening And Cutting Machine for sale (71,142)

Condition: excellent (used), Year of construction: 2020, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2020 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Bcsdpsyh U Ubsfx Aa Usw Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Laser on: 55,176 h Bcsdpfxoxfin So Aa Ujw

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V Bcodpfjym Nbcsx Aa Uew control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine SAME /Bogacki - 2515 BA 2D -demonstration machine - travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 Bjdsgq Nqbjpfx Aa Uocw incl. stainless steel working table ( 2.700 x 1.700 mm) incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours

Condition: used, Year of construction: 2012, functionality: fully functional, Messer Cutting Systems Multitherm 4000 - Oxy-fuel Working area: 2500 x 15000 mm 1 Global Control Plus CNC controller 50 m network cable 1 cooling unit for control cabinet 4 laser diodes 6 drives 1 heat shield (without air cooling) 1 heat shield (without air cooling) Bjdpsynzfpofx Aa Uscw 20 m track 1 OmniFlow oxy-fuel supply, 100 cbm 1 compressed air supply on the machine 1 distributor block for compressed air purging 1 oxy-fuel take-off point with pressure regulator 1 take-off point for compressed air 4 ALFA machine cutting torches 4 compressed air purges for ALFA 4 torch suspensions OL 200 N 4 Sensomat Alfa 20 m energy supply via energy chain 1 emergency pull cord (front) 1 emergency pull cord (rear) 2 wheel well safety devices Including tables and rails

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Bodpfx Aokhmgisa Uocw Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Bedopag Npepfx Aa Ujcw Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Bcodpfx Aaspag R Rs Uow Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Bcedpfxjgqkc Ne Aa Usw Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with Skew Rotator bevel unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator bevel unit Power source: Hypertherm XPR300 Cutting capacity: 50 mm pierce 80 mm separation cut Bcodex Dlwmepfx Aa Usw Beuting extraction table without filter unit Software: Omniwin with Bevel module ä25226

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of construction: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Bedexpfy Sjpfx Aa Ujcw Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear encoders in XY axes Intelligent AT – Automatic Wire Threading For wire diameter 0.10 – 0.3 mm Automatic fine hole searching function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä25226

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 25,769 h, machine/vehicle number: 159687, laser power: 2,500 W, travel distance X-axis: 3,335 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 420 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Bodpfxoymfmbo Aa Uocw Travel X-axis: 3335 mm Travel Y-axis: 1545 mm Travel Z-axis: 420 mm A-axis: ±360 ° B-axis: ±135 ° Maximum workpiece dimensions: 3050 x 1525 x 22 mm Maximum table load: 810 kgf MACHINE DETAILS Laser power: 2500 W Laser model: YB-L250A8M NC control: Mazak & Fanuc L-64 Dimensions & Weight Machine dimensions: 7,525 x 2,875 x 2,300 mm Chiller dimensions: 920 x 1,600 x 1,780 mm Extraction unit dimensions: 850 x 850 x 930 mm Machine weight: 14.6 t Operating hours: 25,769 h EQUIPMENT Chiller Extraction unit

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1580 mm Thickness 94 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate with several symmetrical holes Bjdpfohwn Tuox Aa Uecw Net weight 3400 kg

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Bcjdpfxsdzqccj Aa Uew Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius Bodpfewhf Hfsx Aa Uecw 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW Bcodpfx Aasif Sg Se Ujw - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm Bodpehwn Tisfx Aa Uscw - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Bcjdpfxef Ncads Aa Ujw Track height 650 mm 2x machine cutting torch with cutting table

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle Bsdpfx Aajdzqa Hs Uecw 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Bcsdpfx Aaodzp U Ae Uew Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears Bodjdzp T Dspfx Aa Uscw (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), functionality: fully functional, IDEAL Stack Paper Cutter 5221-95 EP with automatic clamping and programmable backgauge control 520 mm cutting length 80 mm insert height 35 mm residual cut Electromechanical drive for blade and clamping bar. Electrically operated backgauge with EP control module. Digital measurement display, readings in cm/inch (accuracy to 0.1 mm). Direct input of measurements via numeric keypad. Memory key for repeat (chain) cuts. Programmable EP control for 99 programs, each with up to 99 steps (up to 9 dimensions can be saved as a single program step). Program steps can be recalled via Start button. Automatic set function for reference dimension. Programmable paper feed (EJECT). Electronic handwheel with infinitely variable speed for manual fine adjustment of the backgauge. Optical cutting line indicator. Clamping bar guided on both sides, can be operated independently from the blade. Precision backgauge spindle. Adjustable backgauge comb with fine pitch and plastic guides. Two side guides each on the front and rear table. High-quality blade made of premium knife steel. Full steel blade carrier and adjustable blade guides. Two additional side tables included. Comprehensive SCS safety package: Electronically controlled, swiveling safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut operation with repeat cut lock and simultaneous release control; 24-volt control system; patented IDEAL safety drive; automatic return of blade and clamp from any position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from outside; easy front blade change without removing housing parts. Bcedpsypfpbefx Aa Usw Power supply: 230 V / 50 Hz / 1~ Motor power (rated input): 1.1 kW. Dimensions: H 1260 x W 855 x D 1067 mm. Weight: 262 kg. The machine was under a maintenance contract. 2 side tables, spare blade, and 3 cutting sticks included. Shipping available. Please note: Our offers are for used machines, which may show signs of prior use (minor scratches or yellowing may occur).

Condition: used, Year of construction: 2001, functionality: fully functional, cutting width (max.): 1,320 mm, input voltage: 400 V, Equipment: safety light barrier, For sale are 2 machines, being sold as a package. • Wohlenberg W132 guillotine cutter + jogging table. The pallet unloader has already been sold. Year of manufacture: 1979, equipped with cut-computer, 3 blades included. • Wohlenberg W92 guillotine cutter + jogging table. 2 blades included, year of manufacture: 2002 Both machines must be dismantled and collected by 31/03/2026. - Condition: Used - good condition - see photos Bsdpexxr Rcefx Aa Uocw - This is a commercial sale and VAT will be shown separately on my invoices. - Price is net, plus 19% VAT. - The machines are still in use and available by arrangement. - Viewing appointments can be arranged at any time. - Sale without warranty or guarantee.

Condition: excellent (used), Year of construction: 2009, Format (cm): 78 Equipment / Additional information: Bcodpfx Aeynkx Sea Usw Side tables, safety barrier, air table, 1x reserve knife

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch Bcodsb A Iyaepfx Aa Ujw -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg