Used Wilhelm for sale (146)

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Nedpfx Ajwrb U Tsa Eelk

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 510864, turning length: 200 mm, CNC lathe INDEX G200 Overhauled: 2017 Machine number: 510864 max. turning length: 200 mm Bar loading magazine INDEX MBL Main spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Max. Nominal turning diameter: 200mm Max. Rotation diameter: 420mm Nedpfxoulhine Aa Eolk Power Pmax 100%: 7.5/13/20 Torque Mdmax 100%: 35/61/95 Speed: 6300 Counter spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Power Pmax 100%: 7.5/13 Torque Mdmax 100%: 35/61 Speed: 6300 Min. distance collet: 15mm Longitudinal travel: 445mm Rapid traverse: 22.5mm Cross slide 1 XZ (top) XZ: 120x400mm Feed force: 5000N Cross slide 2 (bottom) XZ: 105x400mm Feed force: 5000N Further information on request!

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision Nsdpfjwrfmaox Aa Ejlk EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: used, 1x saw pneumatic adjustable 2,5 hp 1x tenon cutter shaft 6 HP 1x grooving cutter shaft 6 HP pneum. Clamping with foot valve Nlsdoigabxspfx Aa Eek sliding table stop + extension

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: L13 1320, CNC lathe FEMCO HL25 Year of manufacture: 2003 Machine number: L13 1320 Nodpfxsuliyho Aa Eslk Control: FANUC Series 18-T Further information on request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, Nljdpfx Aajl H E H Ho Esk double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 582, Technical data: Maximum component length: 1830mm Maximum component width: 1220mm Maximum component thickness: 350mm Maximum component weight: 400kg Measurement accuracy, length & width: +/- 35/70 μm Measurement accuracy height: +/- 100 μm Measure speed: < 0.25 sec Camera: industrialized ultra-high resolution, professionally mounted in sealed housing Point laser height measuring device: class III R precision laser. Computer processor: Intel quad-core Processor speed: < 3 GHz Hard disk: < 125 GB Display: 20 inch flat panel display or better Additional equipment: Keyboard and optical mouse Operating software: Windows 10 - 64-bit Proprietary InspecVision software: Inspection, SPC, reporting, reverse engineering. Data cable: USB2 or USB3 Njdpolkd A Iofx Aa Eslk KVM: Keyboard, video display and mouse stand (PC integrated into light table unit) Light table construction: frame with removable sheet metal cover Light table measurement surface: laminated glass, tempered with integrated diffusion layer Light source: High-power LEDs Mast construction: Heavy folded sheet metal construction Power supply: 230 volts, single phase, 50Hz or 110 volts, single phase, 60Hz on request Power consumption: 13 A maximum at 230 volts, 20 A maximum at 110 volts Protection devices: Circuit breaker, mounted on the back of the light table Control panel: control switches for power, camera and light. Main current indicator EC Directives: Complies with the Machinery, Low Voltage and EMC Directives Paint color: (powder paint) RAL 5013 (cobalt blue) Operating environment conditions: 10-30 °C Dimensions of the assembled machine (w x d x h): 2177 x 2198 x 4635 mm Weight of the machine: < 950 kg

Condition: new, Year of construction: 2024, saw band length: 4,080 mm, table width: 550 mm, table length: 860 mm, space requirement width: 930 mm, space requirement length: 1,150 mm, space requirement height: 2,000 mm, power: 3 kW (4.08 HP), empty load weight: 280 kg, Closed base with high stability Safe and smooth saw cuts in wood Heavy, tilting cast-iron work table with polished surface Powerful motor Nedpfx Astp Hbvja Eolk Safety switch stops the machine when the door is opened and prevents unintentional restarting and starting Cast iron flywheels ensure smooth running Set cutting width can be easily read on a scale

Condition: good (used), functionality: fully functional, machine/vehicle number: EF17DL 50980, Year of construction: 2005, operating hours: 9,910 h, load capacity: 2,500 kg, Mitsubishi Gas-Powered Forklift with Swing Arm Model FG25N Year of Manufacture 2007 Rated Power 42 kW Load Capacity with Attachment: 1000 kg Load Capacity without Attachment: 2500 kg Nledpfx Aasv Sqd Ej Esk 9,910 Operating Hours Available immediately! Further information upon request!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Nlsdpstwz Tljfx Aa Ejk Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024009, type of input current: three-phase, input voltage: 400 V, volume flow: 4 m³/h, negative pressure: 2.75 Pa, Oil mist separator filter system HEAB OUK 8,000 and 3x HEAB EMU 10-L Year of manufacture 02/2024 Motor power: 5.5kW Voltage: 3x400V 50Hz Fan type: VE 5,500 Nsdpfxjultu Ao Aa Eelk Vacuum pressure max. 2750Pa Volume flow (AP): 4000m^3/h Filter type 1: Pre-filter PPI60 Filter type 2: F9-M100089 Filter type 3: H13-M100137 Machine number: 2024009 Included is a piping system, including 6 extraction hoods and 3x HEAB EMU 10-L filter systems.

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 270018, Connected load 380V 6,6A 3kW band saw length 5110 mm Nedpfxsh Uxq Ts Aa Ejlk fence suction 100 mm machine table tiltable with hand wheel Foot brake

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 48,412 h, TRUMPF TruLaser 7040 Double-head machine Year of manufacture: 2012 Nlsdpfxjvnra He Aa Ejk Power: 2 x 3200W Operating hours: 48412 hours Machine weight: 16,000 kg Available from Q2 2025! Further information on request.

Condition: reconditioned (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 7867/162, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information. Njdpsh Ux Rwsfx Aa Ejlk

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connecting value 380V 1,85kW 4,8A pressure beam length 3100 mm Nsdpfxeh U Dbrs Aa Eslk pneumatic material clamping with hand lever valve chassis stop ruler 520 mm long 6x support brackets

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1277/8-71, Connected load 380V 7A cutting length 4300 mm cutting height 1925 mm rack height 2210 mm machine height 2500 mm Nedpfx Aash U Sqro Eolk room height 2540 mm trimming height 1870 mm Passage height 1940 mm

Condition: new, Year of construction: 2023, Basic equipment Diameter planing shaft 70mm, 3 knives of 410 mm Anodized planing fence 90°- 45° Total length 1800 mm Dressing fence 1500 x 150 mm Nlodpfx Aaomft Nko Ejk Maximum chip removal 4 mm Passage thick planer 410 mm x 230 mm weight: 325 kg incl. special accessories: TERSA cutter block

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Nedpfx Aevi H Dija Eslk Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: not inspected (used), Milling fence with wooden stop jaws, each 760 mm long 30 milling arbor incomplete Nodpfji Atftox Aa Eolk control panel on top cable w. plug 16 A 130 mm suction diameter table 1000 mm wide, 800 mm deep motor approx. 4 kW, total power consumption 12,5 Amp. belt tension via handwheel spindle height adjustment via handwheel infeed jaws individually adjustable via handwheel

Year of construction: 1990, condition: used, Power supply 400 V 3 kW Glue roller Nedpfx Aokkfk Nja Eelk Milling unit 2x flush roll material up to 0,4 mm LxWxH: 3150 x 680 x 1250 mm weight approx. 400 kg Conversion to 2 mm PVC edges possible = additional price 1.000,00 €

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm Nlsdpfxsumw Sbe Aa Eok 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00