Sliding table saw

FIMAL P 450 AX

Condition: new, Year of construction: 2025, functionality: fully functional, Sliding carriage made of anodized aluminum, including high-precision guide made of hardened and ground steel. Sliding carriage can be locked in any position. Saw blade guard with swing-away mechanism. Outrigger with adjustable angle stop, featuring length compensation at 10°, 15°, 22.5°, 30°, 45°, and 90°. Belt change for speed adjustment accessible from above (opening in the saw table). Dedpjy Rkkuofx Aa Hecl Display for set saw blade speed. Electrical system and safety devices in accordance with CE standards. Motorized height and tilt adjustment. Motorized adjustment of the rip fence. Cutting length: 3,350 mm. Cutting height: 155 mm. Cutting width at the rip fence: 1,100 mm. Motor power: 5.5 kW / 7.5 HP. 3 speeds. Scoring saw unit. Tiltable up to 45°. Carriage length: 3,200 mm. Weight: 1,000 kg.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Dcsdpoyfgrpjfx Aa Hsl Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Dcsdowd Irvjpfx Aa Hel Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch Dcsdpfx Aezib Niea Hol

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. Dcedpfox Huhcex Aa Hjl • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: used, Year of construction: 2007, operating hours: 1,650 h, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, scorer, No. 04550 Sliding table saw Martin T 60 CLASSIC Used, year of construction 2007, approx. 1650 operating hours Sliding table length 3000 mm Cutting width 1250 mm Saw blade diameter 250 - 400 mm Saw blade bore 30 mm Max. cutting height 130 mm Motor power 5.5 kW Speeds 4000 / 4800 / 6000 rpm, with digital display Pneumatically controlled 2-axis scoring unit Motor power scoring unit 0.75 kW Electric saw blade tilt adjustment from 0° to 46°, with digital display Electric cutting height adjustment, with digital display Manual cutting width adjustment by handwheel, with digital display Tool-changing system SprintLock Dcjdpfx Aozq Aqwea Hel Machine operation via touchscreen Various cutting programs, including programs for rebating, grooving, cutting angled strips, slotting and tenoning, as well as chain dimensioning Cross-cut table approx. 1300 x 650 mm LW Extendable cross-cut fence up to 3200 mm, with 2 flip stops 2 extraction ports, diameters 120 and 100 mm Including complete technical documentation, 2 saw blades and 3 riving knives Transport dimensions approx. 3200 x 2100 x 1900 mm LWH Weight approx. 1300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2007, Surface planer Model Panhans PA 51 Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Dedpfx Aowkf Hkja Hjcl Discharge table length 1180 mm Motor 4.0 kW / 400 V

Condition: used, Year of construction: 2007, Panel saw Manufacturer: Altendorf Type: F45 Dcjdpfx Aaozuy Nxs Hjl Year of manufacture: 2007 Technical data Cutting length: 3000 mm Saw blade diameter, max.: 500 mm Main saw: 5.5 kW Scoring saw: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: repair required (used), Year of construction: 2008, - Used machine - Saw blade tiltable +/- 45.5° - Sliding table: 3200 mm - Cutting width: 1250 mm - Motor power: 5.5 kW / 400 V - Ex site, loaded free of charge Djdpoy R Ugtsfx Aa Hecl

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Buffing unit Dcodjzcau Ejpfx Aa Hjl Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch