Used Welding Extraction for sale (8,801)

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160300045, Offer 25381 Technical Data - Upright model for filtering welding fumes and grinding dust, - Torch and robotic extraction - Exhaust air can be directed either into the work area or outside - Stationary or semi-mobile installation - Air flow rate up to approx. 500 m³/h - Filtration according to filter class M, efficiency > 99% - Filter cartridges with a filter area of 10 m² - Cleaning system with rotating nozzles - Dust collection container, capacity 40 L - Compressed air connection - 4 x connection pipe NW 45 mm; 1 x connection pipe NW 100 mm - Electrical connection: 400 V / 5.5 kW - Required space: approx. W 1200 x H 1400 x D 700 mm Gsdpfxjxu Uzpj Admjil - Weight: approx. 250 kg

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Gedpfjxf Up Ijx Admoil

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping available for €120. #8095 Gjdev Iyybspfx Admsil

Condition: good (used), Year of construction: 2002, functionality: fully functional, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter KELLER VARIO T. Suitable for plasma, laser, sandblasting, soda blasting and all kinds of dry dust. The fan is located after the filter on the clean side, which reduces the risk of explosion to a minimum. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 315 mm Capacity: 1300 m3/h Vacuum: 4800 Pa Dimensions: Height – 2.05 m Width – 1.02 m Depth – 1.60 m Weight: 700 kg Gsdpfx Aovu Rylsdmjil

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Godpexbflrefx Admjil Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: new, Year of construction: 2024, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! Gijdpfx Adouud Irjmsl The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 190100219, Offer 25365 Godpfxjxqpg So Admsil Technical data: - Stationary cartridge filter with filter monitoring - Cleaning method using pneumatic rotating nozzles - Extracted and cleaned air is recirculated back into the working area - Wall-mounted version with two articulated extraction arms - Articulated extraction arm length: approx. 7 m - Airflow: approx. 1400 m³/h - Fan capacity: approx. 3000 m³/h - Dust collection container: 11 L - Pneumatic connection - Drive – fan: 400 V / 1.5 kW - Weight: approx. 300 kg

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm, welding fume extraction -Handover in the actual condition as seen -Welding fume extraction: with articulated extraction arm -Extraction fan: Brook Crompton 0.75 kW -extraction arm: total length 3880mm -Inlet connection: Ø 170/160 mm, outlet Ø 150 mm -Number: 1x suction available -Price per piece Gsdpfx Aelry Tgsdmjil -Transport dimension: 1900/800/H560 mm -Weight: approx. 67 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Technical data: * max. volumetric flow: 6,000 m³/h * filter area: 60 m² * motor power: 5.5 kW Gsdpfxewthbve Admeil * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: used, Year of construction: 2006, filter area: 31 m², suction capacity: 2,500 m³/h, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The Absolent TSF4F dust filter is built on the latest and most efficient filtration technology. Air is drawn into the filter cartridges, while most residual particles adhere to the outside of the cartridges. The cleaned air passes through the fan into the HEPA filter, which ensures a guaranteed and constant collection efficiency of 99.99%, capturing particles with a diameter of 0.3 µm. The HEPA filter is equipped with a manometer that indicates when the cartridge needs to be replaced. Gedpfx Asxu Hg Dedmsil When the pressure drop across the filter cartridges exceeds the set threshold, the valves in the cleaning air tank open and a pulse of compressed air is released into the filter cartridges from the cleaning nozzles. Make: Absolent Model: TSF4F Specifications: Fan power: 4 kW Capacity: 2500 m3/h Sound level (operation/cleaning): 60/85 dB(A) Filtration area: 31 m2 HEPA filter area: 24 m2 Stock no.: 1078

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 190600036, ProfiMaster is a robust-quality filter unit designed for occasional to frequent use during welding with low to medium levels of welding fumes. The disposable filters of the extraction unit have a large capacity and can be replaced with particular ease. The rotatable and swivel extraction hood allows for a 360-degree working radius, minimizing repositioning during welding. - Hose configuration with 4 m arm - Includes start-stop automatic The unit was purchased in 2019 and, due to operational circumstances, has not been used since spring 2023. Giodpfx Ajwxccfjdmol

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Giodpfeicic Hex Admsl Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications Gsdpfxewdvthj Admeil - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Condition: good (used), Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg Gsdpfx Adsvck Hzjmsil

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Giodpfx Ajxrpmzedmjl Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Gsdpfx Aou S Tfgedmeil Surcharge for new main filter: EUR 195 net

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class Giedpfx Ajwd Nlkjdmol - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm Giedpfxok Aubqo Admol -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Gisdjmquwqjpfx Admol Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms Godpjwn Egrsfx Admjil - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled Giedpfx Adst U Trmjmel -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Gjdpfxswqdycs Admoil Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction Gjdpst U Trtjfx Admsil -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: Gijdsu Aafdspfx Admjl - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg Gjdet U Tryepfx Admoil