Used Welding Converter for sale (7,954)

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Gjdpfsdqzhhex Ai Nouc Weight 1,074 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Godedqzbropfx Ai Njuc Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Guodsdqzcvepfx Ai Njc Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm Gjdstk Ikmepfx Ai Neuc 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Guodotk Irkepfx Ai Nsc Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Gujdpfxswgicbo Ai Noc Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. Gujdpfx Aijtk Iwaj Nsc - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Gsdpetk Iwpsfx Ai Neuc Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Gedpfx Aisrtqm Do Nsuc Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2025, rotary table diameter: 1,000 mm, Equipment: rotational speed infinitely variable, - Horizontal load capacity: 1200 kg - Vertical load capacity: 600 kg - Table dimensions: 1000 mm Gjdpozcyxqofx Ai Neuc - Electrically tiltable - Wireless remote control - Digital display - Documentation - 400V

Condition: good (used), – Horizontal load capacity: 1000 kg Gjdpfxjzcxine Ai Njuc – Vertical load capacity: 500 kg – Table diameter: 900 mm – Infinitely adjustable speed – Electrically tiltable – Wired remote control – 380V

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Stainless steel bandsaw: 6-30 mm Godpfx Ajzcqn Nji Nsuc

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine Gjdpfoy A Sgnex Ai Njuc - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Year of construction: 1980, condition: used, Straightening and welding table Fabr.PÜSCHEL Year 2010 . Table dimensions Length: 1700 mm X Width: 1700 mm Height 760 mm. Gjdoq Ru Hxspfx Ai Njuc Table top thickness 30 mm with adjustment screws in good condition.

Year of construction: 1980, condition: used, Sweat and straightening table. 2000 mm X 2000 mm height 800 mm. Gedpsiuia Hsfx Ai Nsuc

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: Godpfx Aezbvn Esi Neuc - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Guedpfxjzbvnxs Ai Njc Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 2023, condition: used, control Siemens voltage 400V 50 Hz V current intensivity 63 A In our assessment, the robotic welding system is in like-new condition. Technical Specifications: - MIG welding of individual components onto cooling plates using a robot Guedpfx Aiezbvnfe Nec - Automatic torch cleaning and wire cutting - 2-station rotary table for loading during the welding process - Siemens control system Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, 1 unit ESAB MIG 505W welding machine Guodjzclw Sepfx Ai Njc Color: as shown in the pictures, see pictures and inspection Condition: used Location of goods: production hall Payment method: prepayment by bank transfer Shipping: pick-up only at the Coburg location

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation Guedpfxen Sl Dbo Ai Nsc - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: good (used), Welding device, welding robot -Welding device: for plates that are to be welded at an angle Guodpfx Aijb A Hrlj Nec -with: travel distance adjustment (limit switch) -pneumatic: material clamping (angle) -Welding speed: adjustable -without: MIG/MAG welding machine

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding Gujdpfx Aieyrgu Ro Njc • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2012, number of axes: 6, This 6-axis PANASONIC TA-1800 robot welding cell was manufactured in 2012. It features a maximum reach of 1796 mm, providing flexibility for various welding applications. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800 robot welding cell we have for sale. Contact us for further details. Gusdpfozatidox Ai Noc • Robot max distance 1796mm • Robot min distance 472mm

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding device, welding rotator, welding rotator and tilting table, welding rotator Gsdpedwpdujfx Ai Nsuc -Table: is tiltable -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Quantity: 1x welding rotator available Price: per piece -Dimensions: 830/450/H920 mm -Weight: 174 kg

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Kistler, Tilting welding turntable with mobile base -Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8 m/min at Ø 400 mm -Direction of rotation: clockwise/counterclockwise -Quantity: 1 piece available Gsdpeh D Il Tjfx Ai Nouc -Overall dimensions: 740/580/H630 mm -Weight: 145 kg