Ultrasonic welding system

Mecasonic MCS2 CAB

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Rsdpfx Ajv Nzucoa Uop

Condition: used, Year of construction: 2011, Technical details X travel: 660 mm Y travel: 355 mm Z travel: 455 mm Control: WinMax Main spindle: Max. speed: 10,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Work table: Table clamping surface: 760 x 355 mm Rsdpfx Aaexpwy Ds Usp Tool changer: Number of tool positions: 20 pcs. Tool holder: SK 40 Total power requirement: 14 kW Machine weight: approx. 3.5 t Space requirements: approx. 3.5 x 3.0 x 2.6 m Chip conveyor (screw type)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 03/2028, total width: 600 mm, total length: 640 mm, total height: 850 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, power: 8 kW (10.88 HP), Hobart Dishwasher All NEW Hobart Dishwasher FXLSBÄKO-10C - 2 liter fresh water consumption per cycle Rsdpfx Aoxbm Tkoa Uop - Easy Clean System - Rinse aid and detergent dosing pump - Extra deep interior for trays 600 x 400 mm Included accessories: - 1 plate rack, 1 universal rack, cutlery basket with 4 compartments - Inlet and drain hoses, backflow preventer - Drain/wash pump Connection: 400 V, 16A CEE plug Dimensions: 600 x 640 x 820 mm (W x D x H) Brand NEW machine with warranty and spare parts service Quality from a specialized dealer! Benefit from over 35 years of experience! Optionally available: - Maintenance contract - Delivery service - Service package - Spare parts box - Installation & commissioning We have many more dishwashers in stock!

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg Redow S Ii Nspfx Aa Uop - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036940, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface pneum. Cascade 4-fold  Euromap interface handling E18 + E67  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device for injection unit Rsdpfx Aaeugfw Dj Ujp The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rsdjxq Aqwopfx Aa Uop Lukas van Rossum

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Rodpfx Ajm Nbuboa Usp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, travel distance X-axis: 706 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table width: 914 mm, table length: 356 mm, table load: 1,361 kg, spindle speed (max.): 8,100 rpm, number of axes: 3, This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. • Table: 356 x 914 mm • Tool magazine capacity: 20 tools Additional equipment Redpfxex D Hpke Aa Usp • Chip conveyor • Documentation / operating manual

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Redsfv Avvopfx Aa Uop Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 34,0 kN stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when Rodpfjfv Avyox Aa Ujp assembling, punching, embossing, caulking, etc.