Used Arc Welder for sale (959)

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock Bledpfx Alsi E Iz Iecjh

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection Bledpfovg Rh Tox Alcsh - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. Blsdpfx Ajvncfmelcjh - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. Bsdpfxsvncubs Alcolh - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters Blsdpfevnb Tpsx Alceh - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 0108.0272, Lg.no. 24189 Technical data: - Welding current 330 A 40% ED - 220 A 100% ED - Welding current adjustable in 4 coarse + 6 fine steps 30 A / 15.5 V - 350 A / 24 V - 4 roller wire feed infinitely variable 1.2 - 18 m/min - 2 cycle + 4 cycle regulation - Hose package approx. 4 running meters Bledjtp Id Uepfx Alcoh - Ground cable - Pressure reducer - Connection 400 V / 50 Hz - Space requirement approx. W 500 x H 1000 x D 1000 mm - Weight approx. 140 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0625004, Offer 24603 Technical data: Bledpsvncqvofx Alcoh - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 10 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195311, Offer 24601 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A Bedpfsvt Trzox Alcjlh - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 989108 L, Offer 24191 Technical data: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feed infinitely variable - 2 cycle + 4 cycle regulation - Weld seam length - time adjustment - Air-cooled hosepack approx. 3 running meters - ground cable - Pressure reducer Bljdpetvfpkofx Alcjh - 400 V connection - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 20 A, welding current (max.): 350 A, For sale: Kolarc XM350 20-350A 400 Volt +- 10% Water-cooled Pulse Double Pulse Bljdpfxjxyh Ako Alcsh XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and interconnection package. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Bljdpfjt H Nhusx Alceh Manufacturer : Branson Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A space needed: 820 x 1220 x 930 mm weight: 750 kg Blodpe Sdrfefx Alcoh

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Cooling (chamber): Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Bljdjy Htgwepfx Alcsh Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg Blodpfei Huvhsx Alcjh

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT Bledpoymw Spjfx Alcsh FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Free loaded onto truck

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Mounting: on aluminium frame 5) Welding Lathe Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding 6) Heavy Duty Work Table Bjdpex Upf Sofx Alcolh Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 330 kg, load capacity: 6 kg, arm reach: 1,373 mm, controller manufacturer: Fanuc, controller model: R-J3IB Mate, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.08 mm, industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Bljdpjyf Ha Tefx Alcoh Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Current welding stamp dimensions: 2 cm x 100 cm and 2 cm x 50 cm; in use since 02/2022. Bljdjzbb Tmopfx Alcjh A paternoster conveyor system is included free of charge.

Condition: new, Year of construction: 2018, Automatic angle welder Manufacturer: Diez Type: AWS4535 Year of manufacture: 2018 No operating hours! Blsdpfx Ajwriuuslcjh Welding frame: 500 x 350 mm Bandwidth: 32 mm External dimensions: 170 x 130 x 135 cm 3626ä

Condition: used, Year of construction: 2022, functionality: unexamined, machine/vehicle number: R22620E82, overall weight: 1,100 kg, load capacity: 12 kg, arm reach: 2,272 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, repeat accuracy: 0.03 mm, Equipment: documentation/manual, ARC Mate 120iD/12L Bledpfx Asy T Uh Aelceh

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (min.): 40 A, welding current (max.): 420 A, ESS Powermag 461 – Water-Cooled MIG/MAG Double wire feed 3 Months Warranty Refurbished, tested, serviced, and ready for immediate use. Specifications: Bsdpfey Udx Tjx Alcslh 40-420 AMP 380 Volt Water-cooled Synergic 2/4 Step / 4 Roller drive Double Wire Feed 36 Steps adjustable Spot welding Fixed programs Including 2 MIG PRO5000 welding torches, earth work cable with clamp, gas cable, and +- 3 Meter Interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Adjustable reach: 280 to 550 mm Electrode stroke: 15 to 85 mm Welding parameters for sheet steel: approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow 3 l/min Weight approx. 122 kg Welding controller T 90 Mark II Operating instructions and manual available Working stroke triggered by pneumatic foot pedal We have cleaned and inspected the spot welder, the condition is very good, looks like new. Bsdpfxozamh Hs Alcelh

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Bledoy T Iyfspfx Alceh

Condition: used, Technical details: welding current: 330A / 50% und 210A / 100% protection class: IP 23 total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m Bsdpfx Asu Nxv Iolcslh - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V - wire feeder DS III (wire Ø 0,8 - 1,6mm) optinal possible! Steuerung über Roboterinterface *

Condition: used, Technical details: Bedpfxeu Nwb Ns Alcelh welding current: 330A / 50% bis 210A / 100% protection class: IP23 total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V - Draht Ø bis 1,6mm Equipment: - cooling unit Control via robot interface *