Used Weiler Ud 24 for sale (199)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself. Rjdpfsyylqhjx Akiech

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: Rcsdpfxeyylq Uo Akieh >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand Rodpfxjztf A Us Akioch - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Rodszu Tf Topfx Akiech

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Rcedpfeyalurjx Akieh Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: good (used), Year of construction: 2003, Main spindle X-axis: 200 mm Z-axis: 345 mm Rodpfx Akszwplhoioch Spindle speed: 6,000 rpm Bar passage: 42 mm Total power: 22 kW Machine weight (approx.): 5,000 kg

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Rcsdpoyfnwmjfx Akish

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm Rjdpfxey Ty Iho Akisch control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, Rodpfx Aszg Hvvjkisch 2 tool holders.

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Rcedpjr Dvqzsfx Akish Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: excellent (used), Year of construction: 1991, WEILER L + Z LATHE TYPE: PRIMUS GS MACHINE NO.: 4780 YEAR OF MANUFACTURE: 1991 Center distance: 430 mm Center height: 120 mm Equipment: - RÖHM 3-jaw chuck, Ø 125 mm, including jaws - RÖHM 4-jaw chuck, Ø 125 mm, including jaws - Set of collets, including draw tube, 23 pieces - HEIDENHAIN digital measuring system, transverse for feed - Fixed centering point, MK2 - Rotating centering point, MK2 - Longitudinal stop (2 pieces) - Follower plate, Ø 120 mm - Chuck guard - MULTIFX quick-change system, including 3 toolholders, size A - Various turning tools Rsdpfx Akoz Hwwzeioch - Operating tools - Color: green, RAL 6011 - Documentation

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Rcedpfxox Av Rus Akioh

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws Rcodjvivmyopfx Akioh >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Rcjdpfxsvtp Ede Akioh Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: used, Year of construction: 1996, Weiler Guide and Pull Spindle Lathe Type/Model: Condor AC Condition: Used Year of Manufacture: 1996 Technical Data: Center height: 165 mm Distance between centers: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm Spindle bore: Ø 40 mm Spindle speed, stepless: 22 - 2,800 rpm Spindle head: DIN 55027 Size 5 (short taper) Drive power: 5.5 kW Tailstock and feeds: Tailstock internal taper: MK 3 Rsdpfxjzfgupo Akisch Quill stroke: 110 mm Feed range automatic longitudinal and cross feeds: approx. 0.016 - 0.50 mm/rev Thread cutting range suitable for metric threads and inch threads: approx. 0.20 - 28 mm Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Equipment: - Quick-change tool holder system Multifix, 1 insert size A - Bed stop - Coolant system - Chuck guard with limit switch - Collet chuck system, limit switch secured Costs for delivery by freight forwarder, free to curb, see shopping cart or in individual offers for request items.

Condition: good (used), Year of construction: 1997, Maximum turning diameter 950 mm Maximum turning height 200 mm Rcsdpfxezxqvko Akijh Turning diameter over the bed 410 mm Turning diameter over the cross slide 200 mm Bed width 330 mm Total spindle speed range 1 - 3000 rpm Documentation available (see images)

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Rodpfx Aksu Aftgeiech Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Rcsdpfx Akeq H D U Eeijh Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Rsdpfxjykca Ho Akiech Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: used, Year of construction: 1981, machine/vehicle number: 283, Item No. 26208 Technical Data: - Maximum turning height 120 mm - Maximum turning diameter 450 mm - Maximum swing over bed 250 mm - Spindle bore 23 mm - Spindle mounting with threaded nose DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - transverse 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. approx. W 1200 x H 1250 x D 650 mm - Weight approx. approx. 700 kg - Including: - 3-jaw chuck - Quick-change tool holder Rcsdpfx Akszyl H Hjijh - Rotating center - Separate tool cabinet with various accessories

Condition: good (used), Year of construction: 1989, 1 used lathe with lead screw and feed spindle Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Serial number: 89-1314 Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: Rcjdpfx Ajz Adv Eokijh 3-axis digital display Lever collet chuck Chuck guard

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Rcedpfx Akswcxf Dsish Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal Rcsdpfxswthbio Akijh >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm Rsdpfx Akevv Etvsisch >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm Rjdpfx Akjzbc Daeisch from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front